#1
|
||||
|
||||
Bryston bit 20
I purchased a bit 20 last Christmas during Ivan's Bryston sale. Very well made
and a sonic improvement. Although I have no need to adjust anything I was wondering about the ground on the rear of the unit. I presently have it plugged into a dedicated 20 amp circuit grounded off the house panels ground. My question. Is there any further benefit derived from using the rear ground. All of my equipment is running off the bit 20 and are all three prong plugs. I assumed it was for a turntable that I do not own yet. Just wondering if further jumpers or second dedicated ground would do any more or in fact hurt. Thanks |
#2
|
||||
|
||||
Sea music.......Like the old saying goes, "If it ain't broke, don't fix it."
__________________
Dan STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113 VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A |
#3
|
|||
|
|||
Quote:
The only time I have ever used the ground on the rear of the BIT was when I had a turntable that hummed and I found using the BIT ground stopped the hum. james |
#4
|
||||
|
||||
Sounds like good advice. Thanks
|
#5
|
|||
|
|||
Hello Mr. Tanner,
I have a Bryston 14 sst2 amp and 2 Dayton 1000 sub amps, plus the usual preamp and digital media devices. I am installing a dedicated 20 amp line for audio. Do you recommend a Torus/Bryston BIT for conditioning or a SurgeX for surge suppression and filtration or will these limit the dynamics of the amplifier? i live in a rural area prone to bad weather and occasional brown outs and have a whole house generator for times when I lose power. Thanks. JIM Hello Jim, Great question and one of the reasons we decided to offer the BIT (Bryston Isolation Transformer). The 20 amp dedicated line is definitely the way to go so that's an excellent choice. The concern we had with the power line conditioners we saw in the market was they were restricting dynamics as you mentioned and we found that was because the isolation transformers being used were much too small for the amperage require. So the 20 amp isolation transformer in the BIT is designed for 40 amps and as a result does not impede the transient response of the music. The BIT also allows for a very low output impedance on the power being delivered to the amplifier which in turn allows for better transient response for the amplifier. Lastly the BIT is a true Isolation transformer - not just a filter - and your gear is actually working off the magnetic field between the primary and secondary sections of the transformer. So the input side of the system is never seen by the output side. Its like having your own in house power grid. Also the SurgeX is built into the BIT as well. Sonically Jim I think you will notice a much better transient response in your system and a much more extended sound-stage in both depth and width as well as a dead quiet background. Hope this helps. james |
#6
|
|||
|
|||
Bit 15
Will a Bit 15 or 10 work as well with just my Bryston 4b SST3 plugged i?
|
#7
|
|||
|
|||
Quote:
With large amplifiers I would recommend the BIT 15 at a minimum. james |
#8
|
|||
|
|||
Just curious, what cable do you use from the wall to your BIT-20?
What are the good options in this application?
__________________
Serge |
#9
|
|||
|
|||
Quote:
james |
#10
|
|||
|
|||
Sorry James for the confusion. It was initially for OP but for sure your advice is very welcome
__________________
Serge |
|
|
Audio Aficionado Sponsors | |