|
McIntosh Audio A Tradition of Excellence |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Quote:
When I took the OEM mic to the dealer and asked to temporarily trade mics, they checked with Chuck Hinton at McIntosh and both agreed that calibrated mics NEVER are bad and that it must be something else. I did not swap cables, but am going to do so right now as desperate as I am. Thanks for waking me up -- time for more tweaking... Mike
__________________
MX150, MC501's (3), MC352's (2), Aerial Acoustics Model 9's for mains, Aerial Acoustics CC5 for center, and Def Tech surrounds, JL Audio F113's (2) with Sound Anchor Stands, 60 inch Pioneer Kuro, Tivos, Monster HTPS 7000MKII, Oppo BDP-83SE, PS3; dedicated HT still under construction [system used primarily for movies]. |
#12
|
||||
|
||||
I bet Dan hit it - bad cable.
|
#13
|
|||
|
|||
Quote:
Now when I tried the next half dozen times to run Room Perfect, it could not find the Mc mic (no microphone present was the error) and when it does this, it runs a sound through the left main speaker before it gives the missing microphone error. For whatever reason, the next time I tried (probably by now, the 30-40th time today), it sent the test tone to each speaker in turn and then locked up on the last speaker to get the tone with an error that maximum volume was -17 dB and current volume was -14 dB (or something to that effect) and I have tried different volumes as well as turning the subs down and even off. The next half dozen attempts produced similar results but it did not always stop on the same speaker and keep that annoying tone blaring -- the speaker on which the tone hung up on seemed to have no pattern -- even stopping on a subwoofer one time. By this time, the Denon AVP with Audyssey is seeming like a MUCH better choice -- if the dealer (whom I trust although the dealer is new to me) cannot make it right with Chuck's help and do so within a few business days, then it gets boxed up and sent back to McIntosh Labs for repair if the dealer will not take it back. Frankly, I have much greater expectations from McIntosh and my frustrations at this point have created a lot of disappointment from this $12K piece. Hopefully the solution is simple and I will forget about it. Sigh... Mike
__________________
MX150, MC501's (3), MC352's (2), Aerial Acoustics Model 9's for mains, Aerial Acoustics CC5 for center, and Def Tech surrounds, JL Audio F113's (2) with Sound Anchor Stands, 60 inch Pioneer Kuro, Tivos, Monster HTPS 7000MKII, Oppo BDP-83SE, PS3; dedicated HT still under construction [system used primarily for movies]. |
#14
|
||||
|
||||
Very odd, the only time I ever saw that error code was when the Mic was connected to the wrong input.
You are using the correct one.
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#15
|
||||
|
||||
Hi
I don't have much experiance with Macs room perfect but it's similar to my dbx PA+, it will detect if you have a noicy room and will not complete the autoEQ feature on dbx. So, I belive it has to do that your room have bad S/N ratio. Just a thought. Thanks |
#16
|
||||
|
||||
Why the mic could not be faulty ?
Are they all tested in the factory ? The problem is not coming from a noisy room IMHO, cause the mic is not detected at the beginning of the process. Either the mic is faulty, since you eliminated the cable option, or there is something wrong on the circuit. I would try an other calibrated Mc mic first. These are made in China...
__________________
There are two means of refuge from the miseries of life: music and cats Albert Schweitzer |
#17
|
||||
|
||||
Could you explain this?
|
#18
|
||||
|
||||
First step of the process is to connect the mic. Then the unit says if he detects a mic or not, without sending any noise.
He said that the original mic could not be detected. So the room has nothing to see with his problem IMHO.
__________________
There are two means of refuge from the miseries of life: music and cats Albert Schweitzer |
#19
|
||||
|
||||
OK, I'll see.
|
#20
|
||||
|
||||
Quote:
If a new MC mic (and cable to be safe), doesn't solve the problem... Then it's likely you'll need to have that baby packed back up and shipped back. I hope it's the Mic though.
__________________
B&W 802Ds, HTM2D, 805s, JL Audio F113's, MX150, MC501s, MC205, MDA1000, Denon 3800BDCI, Sonos ZP90 (Cullin Mod), 60" Kuro Cables - Cardas Golden Reference Round one to Chuck. |
|
|
Audio Aficionado Sponsors | |