AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Shunyata Research

Shunyata Research Designing Silent Systems for recording, film and music

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old 11-29-2018, 02:11 PM
btn2803 btn2803 is offline
Senior Member

 
Join Date: May 2018
Location: AZ
Posts: 234
Default

Quote:
Originally Posted by btn2803 View Post
Thanks Caelin for your insights and recommendations.

I have 2 20A lines, so will plug the Denali and PS8 separately to those 2 20A Wall Outlets.

I have also bought a Venom Defender. Would you recommend plugging a Venom defender in each of the 20A wall outlet socket along with the Denali and PS8, or connect the Defender in one of the sockets of the Denali and PS8?

Also, the bottom 2 sockets of the Denali are HC. Can I connect source components to these, or they only designed for Amps?

To recap on cable needs:
* PS8 to 20A wall outlet: Alpha NR (best) or Delta NR
* Denali to 20A wall outlet: Alpha EF (best), or Delta EF (as the Denali has great NR capabilities, I think I would only need EF cables. Is this correct or should I use NR cables to connect the Denali to the Wall outlet?)
* Amps and Sub to PS8: Alpha NR (best) or Delta NR (if I connect the PS8 to the wall outlet using Alpha NR)
* Sources (Pre-Amp, CD Player, Streamer, PS Audio DAC) to Denali: Alpha EF (best) or Delta EF

Thanks again.
Best,
Thanh
Hi Caelin,

After I read and learn a bit more about the different Shunyata power distributors, I thought perhaps a simpler solution to my problems of not having enough sockets/outlets for my gears with only the Denali, is to consider the Triton v3 with its 8 sockets which I believe would serve me well for next several years with the gears I have or plan to add. From what I read, I believe the Triton v3 would have higher overall performance (NR, CCI, Transient/dynamics etc..) than the combo Denali + PS8, and the additional cost vs. the Denali + PS8 may be “reasonable”

If I opt for the Triton v3, what would you recommend to connect it to the wall (Alpha vs. Sigma, NR vs. EF)?

For Amps and Sub, it would be NR cables (either Alpha or Delta) to the Triton, and for Sources, it would be EF (Alpha or Delta). Or would you recommend to all NR cables for all gears?

Please let me know your thoughts, and recommendations. Much appreciated.

Thanks.

Thanh
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom.

Last edited by btn2803; 11-29-2018 at 02:31 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 10:38 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video