|
Power Conditioners Voltage regulation to AC Regeneration |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Running a new line...
So I'm finally getting a chance to run a dedicated line to my system and was curious what the basics are to lock in when getting this going.
I only need one line so... What amperage should the circuit be? Are there any circuits known to e better for audio application? Wiring gauge? Wiring type/brand? Anything else to think about (inline transformers etc.)?? I just purchased the Oyaide R1 for the outlet off TommyC and will probably grab another one to make a wall gang of 4 outlets. I'm also using a pair of custom made Hammond toroidal isolation transformers with a dual outlet output. One for the digital side (source & DAC) and the other for the analog side (pre & amp). Will put the Turntable into the wall direct. My system details are in my sig...any other questions I should be asking?
__________________
Jayson Analog: Garrard 301 (Hammertone) | Woodsong Audio Plinth | Schick | Ortofon SPU 90th| A23 SUT (SPU) Everything Else: Devialet D-Premier | KEF LS50 | Sennheiser HD700 | GEEK Out / Pulse X |
#2
|
|||
|
|||
Congratulations Jayson!
This is one of the best upgrades available. |
#3
|
||||
|
||||
Quote:
Dave Sent from my iPad using A.Aficionado
__________________
It's About The Music... |
#4
|
|||
|
|||
Hopefully Dan will join in and provide good advice.
I added to 20A lines. Used 10G wire. Good luck! Mike
__________________
Mike |
#5
|
||||
|
||||
Joe/Dave...Thanks i've read so much about it from those on this board i figured now is the time to strike.
Mike...I'm thinking 2 x 20A lines now too...i'll have to make room in the panel though. Dan...It would be awesome to hear your advice if you get a chance to chime in too...you seem to be the resident "power" expert.
__________________
Jayson Analog: Garrard 301 (Hammertone) | Woodsong Audio Plinth | Schick | Ortofon SPU 90th| A23 SUT (SPU) Everything Else: Devialet D-Premier | KEF LS50 | Sennheiser HD700 | GEEK Out / Pulse X |
#6
|
||||
|
||||
Jayson.......Glad to hear you have decided to go with a dedicated circuit for your sound system. Looking at your power requirements based on the gear in your signature, a single 20 amp circuit will satisfy your current needs. The actual cost of two dedicated circuits, both installed at the same time, will not be that much more. You might want to consider possible future power needs.
The wire gauge will be determined by the over-current device (circuit breaker) rating, and the distance from the electrical panel to the outlet(s). A 20 amp circuit requires a minimum wire size of #12 copper. If the length of the circuit exceeds 50 feet, I would suggest you go up one wire size to #10 copper to ensure minimum voltage drop. By using two 20 amp dedicated circuits you can power your amp and preamp from one circuit, and power your sources from the other 20 amp circuit. That's what I would do. Happy listening.
__________________
Dan STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113 VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A |
#7
|
||||
|
||||
Sorry to be a noob, but what makes a dedicated line "dedicated?" Nothing else plugged into it? On its own fuse panel? On its own phase? On its own circuit breaker?
|
#8
|
||||
|
||||
Randy... What makes it dedicated is that it is a "Home Run" to the breaker panel.
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#9
|
|||
|
|||
I would run two 20 amp dedicated lines. One for you amp and one for the rest of your gear. The wire they install should be 12 gauge. Installing dedicated lines for your gear is one of the best improvements your system can have. Gets it separated from all the other stuff in your house (less noise and more power).
|
#10
|
||||
|
||||
Randy.......As Ivan said, the circuit has independed wires that run from the outlet to a separate circuit breaker in the service panel, and this circuit is not share with any other outlets, hence the term "dedicate" circuit.
__________________
Dan STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113 VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A |
|
|
Audio Aficionado Sponsors | |