|
#1
|
||||
|
||||
Switch box
I am adding a Nakamichi tape deck and will require a switch box to be able to use it and my current reel to reel with my C2300 preamp. I want to use both decks to record and play - the reason for the switch box. Any recommendations by owners/users appreciated.
__________________
“Life is what happens to you while you’re busy making other plans” |
#2
|
||||
|
||||
I went down this road finding out all the switch boxes are from the 70's, Sony Pioneer Akai and Technics all made tape deck switch boxes.
Other option, DBX 200 or 400 but just over kill as it includes switching in/out signal processors, noise reduction, eq's and the like. I had a hard time inserting one of these switch boxes into a high end system. I found locally a Perreaux TS2 passive switch box, but these are rare and really don't come up for sale in the US. I did consider having a boutique company like Marchand build a switch box with point to point wiring and higher quality switches. If cost is not an issue this is the way to go. Ed Last edited by MC-3500; 04-05-2017 at 06:06 PM. |
#3
|
|||
|
|||
I can recommend mspdesigns audio, they made me a switch box to order which is very transparent and well built. May take a few weeks as they are built to order for a reasonable cost.
|
#4
|
|||
|
|||
info@mfspdesigns.com is the contact. High quality components used throughout.
|
#5
|
||||
|
||||
Kevin.......Take a look at the Niles TSB-3. It allows you to switch record and playback of up to three tape decks.
Niles TSB-3 User Guide . . .
__________________
Dan STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113 VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A Last edited by jdandy; 04-05-2017 at 12:52 PM. |
#6
|
||||
|
||||
I picked up a Realistic 42-2115 for like $15 shipped from EBay, not sure about the noise if any just yet. Read a post where somewhere compared it w/the DBX and no difference. Just manual switching so not a lot to introduce any nastiness. I also looked at the DBX switches but seemed like overkill for a relatively simple task that I need to accomplish. Sony also made a couple, the SB-300 which has a distinctive retro look and the SB-500 is a little more modern (by that I mean 80's).
|
#7
|
|||
|
|||
The DX 400 is quite good but, as others noted, it may be overkill. Another cool option is the Manley Labs Skipjack.
|
#8
|
||||
|
||||
I don't know if the Skipjack would allow record and play, it seems like just a basic audio switcher not allowing for rec and monitor ins/outs for all decks. Looks like a basic source switcher.
|
#9
|
|||
|
|||
I think you're correct. You'd need a pair of Skipjacks for both rec and play.
|
#10
|
|||
|
|||
Heres a pic. Does just what I need, only using a couple of inputs at present.
. . . . Last edited by jdandy; 04-06-2017 at 10:20 AM. Reason: enlarge photo |
|
|
Audio Aficionado Sponsors | |