|
D'Agostino Audio Master Audio Systems |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Quote:
Consider it done...or maybe not.
__________________
Tony D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2 |
#12
|
|||
|
|||
Quote:
Second, make sure you power the unit off on the back and then power it back up with the remote "Extender" plugged into the unit. |
#13
|
|||
|
|||
Thanks Jim. I believe I’ve tried that sequence with the extender and the remote was still inoperative. Also tried it without the extender. I’ll give it another try. On another subject, is there a trick to getting the 12v triggers to work? I’ve tried using stereo and mono mini plugs with no luck. Thanks.
|
#14
|
|||
|
|||
Quote:
When you indicate you tried the sequence you did use the on/off switch on the power base and not just the remote. |
#15
|
||||
|
||||
D’Agostino excellent customer support
Quote:
My trigger also works. I’d use mono, not stereo, I’ve had trouble with stereo cables in other systems (although you’d think it would work). Here’s the instructions from the manual addendum, try going through this routine if you haven’t already. Place the Momentum preamplifier in standby using the front panel button. 1.Turn off both Momentum amplifiers with the button on the bottom front of the amplifier 2. Unplug the Momentum amplifiers from the AC outlet. 3. Connect the 12V trigger output from the Momentum preamplifier to the input of the first Momentum amplifier 4. Connect the 12v trigger output of the first Momentum amplifier to the input of the second Momentum amplifier 5. Plug both Momentum amplifiers to the AC outlet 6.Turn on the preamplifier from standby to operate. 7.The Momentum amplifiers should now turn on as well.
__________________
Tony D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2 Last edited by Antonmb; 04-11-2019 at 12:10 AM. |
#16
|
|||
|
|||
Great story Tony, nice to see manufacturers that respond with a solution so quickly.
|
#17
|
||||
|
||||
D’Agostino excellent customer support
Tony - Is there something between the power supply and the chassis? On the site it looks like a piece of granite. It’s on the black versions, it also may be styrofoam?
|
#18
|
|||
|
|||
Nope!
|
#19
|
||||
|
||||
Quote:
I think what you’re seeing in the picture is foam packing material, those must be preamps getting ready to ship.
__________________
Tony D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2 |
|
|
Audio Aficionado Sponsors | |