#61
|
|||
|
|||
The new D/A converter will probably increase the sampling rate to 192/24 or 32 PCM. I am sure this pre-amp will benefit from the cubed technology also which may make it competitive if not better than the BP26.
|
#62
|
|||
|
|||
Quote:
Yes the old internal DAC in the BP17 was limited to 96/24 and the new plug in DAC can do PCM 192/36. james |
#63
|
||||
|
||||
Is the BR2 available with updated button labels to match functionality with the new preamp and dacs? So I don’t have to select 5/Aux/Ph to get BAL1 for example.
Thanks |
#64
|
||||
|
||||
Bryston Launches BP-17³ Cubed Preamplifier
Quote:
Hi James, when was the new dac module made available, or did the Cubed model always have it? Is it possible to get an AES/EBU input? As for the remote, any chance Bryston has updated or will update the button labels? Last edited by Stefan_DR3; 09-06-2018 at 04:39 PM. |
#65
|
|||
|
|||
Quote:
The new DAC became available just last month. There is only 1 remote now and it is the BR2. james |
#66
|
|||
|
|||
MEMO: To All Bryston Customers
SUBJECT: Bryston Awarded a Class ‘AYE’ rating for the BP-17 Preamplifier September, 2018 Hi Folks, A tip of the hat to our Bryston BP-17³ Cubed preamplifier. The least expensive fully featured stereo preamplifier in the latest issue of Stereophile Magazine to earn a ‘Class A’ rating! |
#67
|
||||
|
||||
Congrats James. I am certainly happy with mine
Is it possible to upgrade firmware (if it has any) in the preamp? |
#68
|
|||
|
|||
Quote:
No software changes so far. james |
#69
|
||||
|
||||
Looks like the prefect front-end for a new B300-ST-cubed integrated amp. Plug-in modules (2) for DAC & phono & ??
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#70
|
||||
|
||||
Fellow BP-17 owners,
Has anyone noticed a “rogue” LED illuminating on the front panel when the unit is turned off? I don’t just mean the red Standby LED. I occasionally (once or twice a week) get a red or green LED on Input 4 / D2 coming when it goes into Standby. It goes away when power is cycled of course. Doesn’t seem to affect anything... Just a bizarre glitch! |
|
|
Audio Aficionado Sponsors | |