#21
|
||||
|
||||
I would add... Triple check your speaker cable connections for current polarity.
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#22
|
|||
|
|||
Polarity triple checked. The wire is rocket 88 and I can see the red/black twisted wires before it goes to the banana plug on both sides.
If polarity is screwed up inside the O3 or Mc I'll never know. |
#23
|
|||
|
|||
I learned of the battery test.
Hook the speaker to a battery and the speakers will push OUT. Hook the battery backwards and the woofers will push IN. All 7" woofers passed the test. The speaker wire is connected with the correct polarity. |
#24
|
|||
|
|||
what is your system made up of? Amps/Pre, etc.
|
#25
|
|||
|
|||
MX122 and MC8207
|
#26
|
|||
|
|||
post your settings for the MX122 in terms of bass management and other related items.
B |
#27
|
|||
|
|||
Putting the MX122 in "PURE STEREO DSP BYPASS MODE" for using his front speakers only and no subwoofers for music will solve his problem to get bass back in the picture while determining the best placement. When that problem is solved if he wants to use the subs for music then he can dial them in and re-engage the bass management using an appropriate CD or DVD.
__________________
Jack |
#28
|
|||
|
|||
Quote:
B |
#29
|
|||
|
|||
He did.
"I have subwoofers. 2 channel music won't use a sub unless I set my speakers to "small" and the crossover is 150 hz. Does distance from a wall or room shape or size effect bass? " Using the Bypass mode with the mains first lets him get them placed in the best location for his bass needs and soundstage. He can figure the other part out afterwards. One thing at a time.
__________________
Jack |
#30
|
||||
|
||||
By far the most important sentence in the entire thread.
|
|
|
Audio Aficionado Sponsors | |