#1
|
|||
|
|||
LP Storage Solutions
I am in need of a new shelving system for LP's (~4,000 + 3 boxes of singles). My plan to pick up a couple of the Ikea Expedits was thwarted by the fact that Ikea has decided to replace the Expedit with a new, as yet unreleased model due in June or July. What are you guys using to store your records?
Thanks, Gregory |
#2
|
|||
|
|||
[ame=http://www.youtube.com/watch?v=0u0MYXITB9s&list=FL5guh0evQJZRfhdZR1V_dcw& feature=share]Building Custom Vinyl LP Record Shelves Walkthrough - YouTube[/ame]
I'm toying with the idea of hiring a woodworker to make one of these for me. |
#3
|
|||
|
|||
Thanks. I know there's a guy at the local swap meet that makes bookshelves out of pine. I'll have to see if he can do this with Oak
Cheers, Gregory |
#4
|
||||
|
||||
DEFINITELY use oak or other hard wood. My brother had oak record shelving made for his LP's that are twelve feet high--floor to ceiling with a rolling library type ladder.
Pine will sag unless you use it 1.5" thick and / or have vertical supports very close together. Last edited by GaryProtein; 03-18-2014 at 10:20 PM. |
#5
|
||||
|
||||
I make my own staggered top- and bottom-slatted modules using poplar that I biscuit-join to get the right depth. The construction method can be applied to virtually any kind of wood you'd want to use. Here's how the process looks in stages:
Stacking five units high poses no stability issues (and that's on carpet here). The same applies to placing module stacks side-by-side. Not fancy, but it's a method that gives me expansion and placement flexibility at relatively low cost. Jim
__________________
Jim Bedroom: Aurender N150, TEAC UD-505 (AKM version), EMIA Cu Elmaformer passive line stage, conrad-johnson MF2500, Paradigm Studio 20 v5. Shunyata Delta D6, Altaira CG hub. Shunyata Alpha XC, Delta NR v2, Alpha USB, Alpha and Venom CGC/SGC. Wireworld Eclipse 8 interconnect & speaker cables. Stillpoints footers, Butcher Block Acoustics maple platforms. Stillpoints and GIK acoustic panels. Home Office:Windows 11 PC/JRiver 31, TEAC UD-501, Luminous Audio Technology Axiom II Walker Mod passive, conrad-johnson Sonographe SA-250, Paradigm SE-1. Shunyata Hydra (Original Version), Venom 10 NR. Wireworld Eclipse 7 interconnects. Blue Jeans speaker cable. Living-Dining Room: Windows 11 Laptop/JRiver 29, Oppo BD-83, TEAC UD-501 DAC, SOTA Sapphire TT, Graham Slee Era Gold V, Ortofon 2M Black, McIntosh MR-77, c-j Sonographe SC-25, c-j MF2500, Paradigm SE-3. Wireworld 8 IC, Blue Jeans SC. Shunyata Hydra 8 v.2, Shunyata Delta NR, Venom NR. GIK 244 bass & scatter-plate panels. |
#6
|
||||
|
||||
I like your design using interleaving blocks for alignment and stability.
I would add a three to four inch pedestal for the bottom most cell to prevent record bashing by vacuum cleaners. Are you showing maple or poplar? Last edited by GaryProtein; 03-18-2014 at 10:22 PM. |
#7
|
||||
|
||||
Poplar. One of these days I'll get around to oil-finishing all the modules.
Jim
__________________
Jim Bedroom: Aurender N150, TEAC UD-505 (AKM version), EMIA Cu Elmaformer passive line stage, conrad-johnson MF2500, Paradigm Studio 20 v5. Shunyata Delta D6, Altaira CG hub. Shunyata Alpha XC, Delta NR v2, Alpha USB, Alpha and Venom CGC/SGC. Wireworld Eclipse 8 interconnect & speaker cables. Stillpoints footers, Butcher Block Acoustics maple platforms. Stillpoints and GIK acoustic panels. Home Office:Windows 11 PC/JRiver 31, TEAC UD-501, Luminous Audio Technology Axiom II Walker Mod passive, conrad-johnson Sonographe SA-250, Paradigm SE-1. Shunyata Hydra (Original Version), Venom 10 NR. Wireworld Eclipse 7 interconnects. Blue Jeans speaker cable. Living-Dining Room: Windows 11 Laptop/JRiver 29, Oppo BD-83, TEAC UD-501 DAC, SOTA Sapphire TT, Graham Slee Era Gold V, Ortofon 2M Black, McIntosh MR-77, c-j Sonographe SC-25, c-j MF2500, Paradigm SE-3. Wireworld 8 IC, Blue Jeans SC. Shunyata Hydra 8 v.2, Shunyata Delta NR, Venom NR. GIK 244 bass & scatter-plate panels. |
#8
|
||||
|
||||
I bet it will be YEARS once you have the records all stacked up!
|
#9
|
||||
|
||||
You got me!
__________________
Jim Bedroom: Aurender N150, TEAC UD-505 (AKM version), EMIA Cu Elmaformer passive line stage, conrad-johnson MF2500, Paradigm Studio 20 v5. Shunyata Delta D6, Altaira CG hub. Shunyata Alpha XC, Delta NR v2, Alpha USB, Alpha and Venom CGC/SGC. Wireworld Eclipse 8 interconnect & speaker cables. Stillpoints footers, Butcher Block Acoustics maple platforms. Stillpoints and GIK acoustic panels. Home Office:Windows 11 PC/JRiver 31, TEAC UD-501, Luminous Audio Technology Axiom II Walker Mod passive, conrad-johnson Sonographe SA-250, Paradigm SE-1. Shunyata Hydra (Original Version), Venom 10 NR. Wireworld Eclipse 7 interconnects. Blue Jeans speaker cable. Living-Dining Room: Windows 11 Laptop/JRiver 29, Oppo BD-83, TEAC UD-501 DAC, SOTA Sapphire TT, Graham Slee Era Gold V, Ortofon 2M Black, McIntosh MR-77, c-j Sonographe SC-25, c-j MF2500, Paradigm SE-3. Wireworld 8 IC, Blue Jeans SC. Shunyata Hydra 8 v.2, Shunyata Delta NR, Venom NR. GIK 244 bass & scatter-plate panels. |
#10
|
|||
|
|||
lpbin.com I have one of these in the oak finish and plan to get one more. I prefer this method because I find it easier to find what I'm looking for. I hate looking at just spine of the album and after awhile it literally becomes a pain in the neck.
Sent from my iPad using A.Aficionado Last edited by jdandy; 03-20-2014 at 03:49 PM. Reason: Active link to non-sponsor seller against forum rules. |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |