#1
|
|||
|
|||
N20 and McIntosh C2700
Hi all,
To test the McIntosh DAC (vs. PS Audio Mk1) I recently connect my Aurender N20 to C2700 via USB (Shunyata) and Optical (WW) cables, and experience issue with the left channel. There is no sound from the left channel. I check all other cables and they are fine. I have also the PS Audio MK1 which I connect the N20 via USB, and there is no issue with this combo. Anyone experience the same issue, or know what could be the problem? Aurender is on Linux so not sure that is the problem. Thanks.
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. |
#2
|
||||
|
||||
No idea, hmmm , my N20 has no such issue with my D1100 dac.
__________________
Preamp: McIntosh C1100T/C1100C, McIntosh MX180 Amp: McIntosh MC611 (2), MC601 (3), MI254 Digital: McIntosh D1100, McIntosh MCT450, Meridian 808v6, Aurender N20, Aurender ACS10, Oppo 203 Analog: McIntosh MT10, Hana Umami Red Phono preamp: Simaudio Moon 610LP, 820S Signal cables: WW Gold Eclipse 7 speaker cables; Shunyata Sigma v2 XLR (2); Sigma v1 XLR (2), Transparent Ref XL (MM2) XLR; WW Silver Eclipse 7 (4) Digital cables: Shunyata Omega USB, Omega Ethernet, Sigma Ethernet; WW Platinum 7 Coax, AES/EBU Switch: Innuos PhoenixNet Power: Audioquest Niagara 7000, Audioquest 5000, Audioquest Dragon, Hurricane PC, Shunyata Alpha HC, AQ NRG Edison outlets, (8) 20 amp dedicated lines, 125 amp subpanel Speakers: Wilson Sasha DAW, Dynaudio Contour 30, Dynaudio Contour 25C Subs: REL s/812 (6), REL s/510 (3) Accessories: HRS M3X2 shelf (MT10), Stillpoints Ultra II v2 w/ bases (21), Ultra SS (12), Mini (12), LPi v1 Sound treaments: Artnovion |
#3
|
||||
|
||||
Send me your N20 and I'll hook it up to my C2700.
__________________
Doug 2-Channel McIntosh C2700, (2X)MC601, MEN220 Lampizator Baltic 3 Sonore opticalRendu, SGC sonicTransporter i5 (Gen 3), Roon Thorens TT TD318 B&W 803D3 JL Audio (2x)f110v2 Shunyata Denali/S v2, Alpha v2 PCs, WW Gold/Silver Eclipse Interconnects, Platinum USB Whole House Music Listening Bluesound Vault2i, PowerNode2, PulseMini2i, Pulse2, (3x)Flex 5.2 System Above using Passthru Marantz SR7012 Oppo 205, Apple TV (4th gen), Sony XBR850e65 B&W HTM2 D3 Second 5.1 System Castoffs from Upgrades LRC Paradigm Millenia 20, Velodyne MiniVee 10, KEF surrounds, DefTech AW6500 |
#4
|
|||
|
|||
USB can be a finicky interface but a problem with Toslink is a little surprising.
Perhaps this may work if you have not tried it: Disconneced your other DACS from the wall and your pre-amp. Un-plug the 2700 for a minute or two, hook up the Aurender to the 2700 plug it all in and fire it all up. John
__________________
AKA J2Ordan McIntosh/Legacy/VPI/Bricasti/DIYCable |
#5
|
|||
|
|||
Quote:
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. |
|
|
Audio Aficionado Sponsors | |