#1
|
||||
|
||||
How are a pair of JL subs dialed in?
How is the ARO used and how are the two subs independently "dialed in" if one sub is used for each channel (not master/slaved) of a 2 channel system?
__________________
Speakers: Magnepan 1.7 Accuphase: E-408 180 watt integrated amp. DAC & phono boards. Accuphase DP-55V CD/DAC MacMini music server, Ipad remote. PS Audio PPP. Kimber Hero, Kimber 8TC. Halide Bridge |
#2
|
||||
|
||||
wpines.......I only have a single f113, but if I had two, I would set the second one up exactly as the first, with the first one turned off. I would feed a signal from the #2 speaker output on the preamp, left to one Fathom, right to the other. Automatic Room Optimization (AOR) is achieved by using the JL Audio microphone that is provided with the sub, and using the computer generated test tones the are automatically generated by the sub;s electronics when the calibration button is push with the mic plugged into the subwoofer. Go here for the Fathom f112 and f113 owner's manual: http://home.jlaudio.com/pdfs/10456.pdf
__________________
Dan STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113 VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A |
|
|
Audio Aficionado Sponsors | |