AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Shunyata Research

Shunyata Research Designing Silent Systems for recording, film and music

Reply
 
Thread Tools Display Modes
  #1  
Old 02-01-2014, 07:20 PM
jax4736 jax4736 is offline
Senior Member

 
Join Date: Dec 2011
Location: Washington DC, Metro area
Posts: 456
Default New Triton/Anaconda owner

Okay, I pulled the plug and bought a Triton and two Anaconda power cords. My listening room has just the speakers and a single stereo power amplifier. I have one Anaconda going from the amplifier straight to the wall.

In the adjacent room are my sources and preamp. The Triton is in there, connected to the wall by the other Anaconda. My sources are cabled with Venom 3 power cords for now. Couldn't afford the Typhon yet.


Wondering if I should get a Cyclops for the power amp, or just leave it straight in the wall.

Impressive so far, with the loaner cables/Triton until my new ones comes in. I'm hearing blacker backgrounds, more detail, and certainly more bass extension. The noise floor seems to have dropped a whole lot. Not sure how "burned in" this gear is. But very nice here in these first few moments.
__________________
System: Shunyata Triton v3/Typhon/DPC-6v2, Defender, Anaconda /Sigma power cords and interconnects, Linn LP12, Ayre P-5xe, dCS Vivaldi full stack, Ayre KX-R Twenty, Ayre MX-R Twenty, Wilson Alexia Series 2 Speakers
Reply With Quote
  #2  
Old 02-01-2014, 07:37 PM
jazzhead's Avatar
jazzhead jazzhead is offline
Senior Member
 
Join Date: Jan 2011
Posts: 519
Default

Congrats, good move ,seems to be steadily growing fan base for the Triton . Will you be investigating the Typhon add on ?
Reply With Quote
  #3  
Old 02-01-2014, 07:41 PM
jax4736 jax4736 is offline
Senior Member

 
Join Date: Dec 2011
Location: Washington DC, Metro area
Posts: 456
Default

Want to get some advice on it. Looking at it perhaps in two to three months.

I'm sitting here listening to a recording I know VERY well. Hearing a wealth of details I never heard before. Simply astonished.

I hope I don't need two Typhons, my amplifier and sources are on different rooms. I have the amplifier plugged in to the wall directly, albeit with an Anaconda.
__________________
System: Shunyata Triton v3/Typhon/DPC-6v2, Defender, Anaconda /Sigma power cords and interconnects, Linn LP12, Ayre P-5xe, dCS Vivaldi full stack, Ayre KX-R Twenty, Ayre MX-R Twenty, Wilson Alexia Series 2 Speakers
Reply With Quote
  #4  
Old 02-01-2014, 07:57 PM
BlueFox BlueFox is offline
Member
 
Join Date: Dec 2012
Location: Silicon Valley
Posts: 1,235
Default

I believe a reason for the Cyclops is to provide the benefit of a Triton to amps. It does not restrict current, and is designed to reduce DTCD. I used to have my source and amps (Pass Labs X600.5) on my Triton, but recently added a Cyclops with a Z Anaconda going to the wall for the amps. Works great, and sounds even better
__________________
Bud
Reply With Quote
  #5  
Old 02-01-2014, 10:16 PM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
Cool, calm scientist
 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,946
Default

Quote:
Originally Posted by jax4736 View Post
Want to get some advice on it. Looking at it perhaps in two to three months.

I'm sitting here listening to a recording I know VERY well. Hearing a wealth of details I never heard before. Simply astonished.

I hope I don't need two Typhons, my amplifier and sources are on different rooms. I have the amplifier plugged in to the wall directly, albeit with an Anaconda.
Yep, sounds like the improvements from Shunyata gear. Taking out all the grunge, hash, RFI, EMI and lowering the noise floor makes a big big difference.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
  #6  
Old 02-01-2014, 10:31 PM
PLK PLK is offline
Guest
 
Join Date: Jul 2013
Location: USA
Posts: 534
Default

Quote:
Originally Posted by jax4736 View Post
Want to get some advice on it. Looking at it perhaps in two to three months.

I'm sitting here listening to a recording I know VERY well. Hearing a wealth of details I never heard before. Simply astonished.

I hope I don't need two Typhons, my amplifier and sources are on different rooms. I have the amplifier plugged in to the wall directly, albeit with an Anaconda.
Are your amp and source components both on the same circuit?

If they are, one Typhon will do it.
Reply With Quote
  #7  
Old 02-02-2014, 12:28 AM
jax4736 jax4736 is offline
Senior Member

 
Join Date: Dec 2011
Location: Washington DC, Metro area
Posts: 456
Default

Actually yes, my amp and sources are on the same circuit.

Should I plug the Typhon into the wall outlet, or use the umbilical to the Triton? I thought the best performance was to use one of the eight outlets on the Triton, rather than the C19 port....
__________________
System: Shunyata Triton v3/Typhon/DPC-6v2, Defender, Anaconda /Sigma power cords and interconnects, Linn LP12, Ayre P-5xe, dCS Vivaldi full stack, Ayre KX-R Twenty, Ayre MX-R Twenty, Wilson Alexia Series 2 Speakers
Reply With Quote
  #8  
Old 02-02-2014, 12:54 AM
BlueFox BlueFox is offline
Member
 
Join Date: Dec 2012
Location: Silicon Valley
Posts: 1,235
Default

Quote:
Originally Posted by jax4736 View Post
I thought the best performance was to use one of the eight outlets on the Triton, rather than the C19 port....
Correct. The C19 port uses the least expensive umbilical. Best results are with the shorter Ztron umbilicals. Don't know whether best results are from being plugged into the wall or Triton, but it was designed as a Triton add-on, not a stand alone product. Attached to the Triton puts it electrically closer to the Triton versus attached to the wall.
__________________
Bud
Reply With Quote
  #9  
Old 02-02-2014, 01:43 AM
PLK PLK is offline
Guest
 
Join Date: Jul 2013
Location: USA
Posts: 534
Default

Quote:
Originally Posted by jax4736 View Post
Actually yes, my amp and sources are on the same circuit.

Should I plug the Typhon into the wall outlet, or use the umbilical to the Triton? I thought the best performance was to use one of the eight outlets on the Triton, rather than the C19 port....
I would plug the Typhon into the outlet that's closest to your circuit breaker.

BTW, have you upgraded the outlets that your amp and Triton are plugged into?
Reply With Quote
  #10  
Old 02-02-2014, 01:58 AM
jax4736 jax4736 is offline
Senior Member

 
Join Date: Dec 2011
Location: Washington DC, Metro area
Posts: 456
Default

Not upgraded the outlets. I rent the house. I could upgrade if I wanted to, the Landlord is okay with it. But not sure I wanted to get into upgrading the outlets.
__________________
System: Shunyata Triton v3/Typhon/DPC-6v2, Defender, Anaconda /Sigma power cords and interconnects, Linn LP12, Ayre P-5xe, dCS Vivaldi full stack, Ayre KX-R Twenty, Ayre MX-R Twenty, Wilson Alexia Series 2 Speakers
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 03:21 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video