AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Inspire by Dennis Had

Inspire by Dennis Had Enjoying Vacuum Tube Audio

Reply
 
Thread Tools Display Modes
  #5301  
Old 05-12-2019, 07:33 PM
oldtech0 oldtech0 is offline
Junior Member
 
Join Date: Dec 2018
Posts: 10
Default

I have added a switchable regulated/non regulated screen voltage to the PSE mono blocs. output tubes. I can now safely run the 6F6 output tubes on these guys. I also changed out the cathode bias resistors 750 to 560 ohm. Bumped up the bias a few ma.
I am just floored how good the 6F6 tubes sound. I have only used the glass enveloped tubes so far. When I do not see any red plate issues over time I will put the metal cans in. I have also added bias and output tube plate voltage test jacks. That has shown that there can be a 30-40 VDC difference in 5Y3 rectifier tube output. Who da thunk? I also have a bad 5R4GY that puts out 100 VDC less than my other one. Nice to know some of what is happening in the amp without flipping it over on the bench.
Reply With Quote
  #5302  
Old 05-13-2019, 01:12 PM
pechelman pechelman is online now
Junior Member
 
Join Date: Feb 2019
Posts: 7
Default

Quote:
Originally Posted by straitwire View Post
Hey pechelman, with the B+ off there is some magnetic field pick up from the power transformer.
With the B+ in the on position with the amp operating, DC current is flowing through the output transformers and the hum will be eliminated.
Thanks, straitwire.

Also, a general question that's half 45 firebottle/inspire related and half general tube newby question; Does anyone have a list of recommended and compatible tubes for this amp? Not looking to use anything other than a 45 output tube of course in this amp, but looking for specific brand recommendations. Have heard the RCA and Philco's are very similar and maybe the Sophia's are the one to try next?

On the recommendation & compatibility side of my question curious about the 6SL7 driver and 80 rectifier.

Have heard from someone else they like a 6SU7GTY and a 5Z3 in this amp. Is there a chart or spec sheet where I could find out what tubes are equiv/compatible? I.e. how would I know that an 6SU7 is a drop-in replacement for a 6SL7? Unfortunately I have 2 strikes against me; one being too young to have grown up using tubes and second that I'm a mechanical engineer, and tend to stay away from angry pixies/electrical engineering. Reading a spec sheet is no problem but even better if there's a website that lists compatible tube types.

Impetus for looking for tubes: First off, I would like a spare set of tubes should anything happen to my current set, so not really picky and in no rush. Second, with the philco 45s/80 and JAN 6SL7 provided by Dennis, along with my omega junior 8's, I wouldnt mind a little more top end reach. There's lots of low end extension right now that I wouldnt mind compromising on.

thanks in advance
Reply With Quote
  #5303  
Old 05-14-2019, 12:17 PM
maro maro is online now
Junior Member
 
Join Date: Mar 2015
Posts: 4
Default

Quote:
Originally Posted by pechelman View Post
Thanks, straitwire.

Also, a general question that's half 45 firebottle/inspire related and half general tube newby question; Does anyone have a list of recommended and compatible tubes for this amp? Not looking to use anything other than a 45 output tube of course in this amp, but looking for specific brand recommendations. Have heard the RCA and Philco's are very similar and maybe the Sophia's are the one to try next?

On the recommendation & compatibility side of my question curious about the 6SL7 driver and 80 rectifier.

Have heard from someone else they like a 6SU7GTY and a 5Z3 in this amp. Is there a chart or spec sheet where I could find out what tubes are equiv/compatible? I.e. how would I know that an 6SU7 is a drop-in replacement for a 6SL7? Unfortunately I have 2 strikes against me; one being too young to have grown up using tubes and second that I'm a mechanical engineer, and tend to stay away from angry pixies/electrical engineering. Reading a spec sheet is no problem but even better if there's a website that lists compatible tube types.

Impetus for looking for tubes: First off, I would like a spare set of tubes should anything happen to my current set, so not really picky and in no rush. Second, with the philco 45s/80 and JAN 6SL7 provided by Dennis, along with my omega junior 8's, I wouldnt mind a little more top end reach. There's lots of low end extension right now that I wouldnt mind compromising on.

thanks in advance
Sounds like you are having fun with the amp. I don't have a 45 Inspire but have experience with many 45 tubes and 6sl7's. Have listened to almost all vintage 45's as well as Sophia and EML. Hands down the best sounding 45 is the EML 45 solid plate. better clarity, harmonics and extension than the rest of the pack. They are expensive but in a class of their own. For top end extension the Sylvania VT-229/6SL7 is excellent if you want even more top end find an Adzam 6SL7. Can't offer much on 80 rectifier, never used them.
Reply With Quote
  #5304  
Old 05-15-2019, 07:43 AM
FloridaBoy FloridaBoy is online now
Senior Member
 
Join Date: Jun 2015
Location: SW Florida
Posts: 949
Default

Quote:
Originally Posted by maro View Post
Sounds like you are having fun with the amp. I don't have a 45 Inspire but have experience with many 45 tubes and 6sl7's. Have listened to almost all vintage 45's as well as Sophia and EML. Hands down the best sounding 45 is the EML 45 solid plate. better clarity, harmonics and extension than the rest of the pack. They are expensive but in a class of their own. For top end extension the Sylvania VT-229/6SL7 is excellent if you want even more top end find an Adzam 6SL7. Can't offer much on 80 rectifier, never used them.
on the EML 45. I used them in a Korneff 45 amp. Also, the new Shuguang WE 6SL7 plus is excellent. I'm using one in an Inspire PSE.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 05:59 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
ęCopyright 2009-2019 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Acoustic Sciences Corportation
Acoustic Sciences Corportation
Legend Audio & Video
Legend Audio & Video
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Accuphase
Accuphase