#451
|
|||
|
|||
Yes and not what I expected.
|
#452
|
||||
|
||||
Indeed.......... you never know when to expect the Spanish Inquisition.
To stay on topic, am sure the SP3 is a great piece of gear.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Greek-stuph Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#453
|
|||
|
|||
Last edited by LordoftheRingsEE; 02-08-2013 at 10:17 PM. |
#454
|
|||
|
|||
Great thread, a lot of info here about the SP3. It's excellent to see James' participation. I have seen many discussions about why room correction was not included and James explained this very well. Something I haven't seen discussed unless I somehow happened to miss it was the lack of Dolby Pro Logic IIz and dts Neo:X. Since the SP3 is a new platform not having either of those stands out to me.
James would you mind commenting on why both formats were not licensed in the SP3? I see there are 2 Aux outputs so I suppose they could be put into use to implement Dolby ProLogic IIz via a software update but that still leaves the platform incapable of dts Neo:X in it's full implementation. It would have been comforting to see 5 (or 7) Aux outputs meaning 4 for Neo:X and 3 additional sub outs to allow for 4 subs in total but since two sub outs seems to be the norm these days 5 Aux outs would work as well. Thanks |
#455
|
|||
|
|||
Quote:
james |
#456
|
|||
|
|||
Thanks James. I assume then that also applies to expanding the discrete surround material because Neo:X and PLIIz can be applied to 5.1 and 7.1 sources, they are not limited to 2 channel sources?
|
#457
|
|||
|
|||
Quote:
james |
#458
|
|||
|
|||
Gotcha, thanks again.
|
#459
|
|||
|
|||
And, run they do.
|
#460
|
|||
|
|||
Firefox browser incompatibility issues
Recent versions of Firefox (2012 and 2013) seem to result in corrupted SP3.bin file uploaded to SP3 unit. This causes the programming to fail reverting the unit back to the factory backup firmware. It is recommended to use Chrome, Safari or Internet Explorer. If the unit upgrade fails due to the above mentioned reason, it is recommended to repeat the procedure using other browser. If the original URL address cannot be accessed, then use the following direct link, which will always work even if all files were corrupted: http://xx.xx.xx.xx/upload where xx.xx.xx.xx are the currently used SP3 address digits displayed on the front panel logo screen when the left arrow key is pressed. Example: 169.254.1.1 Stan Bleszynski Bryston Ltd. 6-March-2013 |
|
|
Audio Aficionado Sponsors | |