#21
|
||||
|
||||
Quote:
I have mine side by side in the rack. I don’t think it matters too much. I wanted to keep the power supply away from the audio. Tom
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v |
#22
|
||||
|
||||
My C1100 is stacked with Stillpoint mini's between the units. I just liked the look that way but side by side is fine also.
__________________
Paul Harbeth 40.3 XD, Sound Anchor stands w/ Stillpoints, Luxman M900 & C900, Aurender N20, Jay's Audio CDT3 - MK3 CD player, Mola Mola Tambaqui DAC, Shunyata Everest, Altaira |
#23
|
||||
|
||||
The C1100 manual states on page 7 -- do not stack the C1100T on top of the C1100C.
I used HRS isolation feet to give it another 1.5 inches and called it a day. Just sayin' Best Sirs, Bob
__________________
Amps:VAC 450iQ Monos in Silver Flake on HRS M3X2-1921's, HRS G7 Footers/G-Links & Sound Anchor Conecoasters. Preamp:VAC Statement (on order) (Silver Flake) Digital Source: dCS Rossini CD/SACD Transport, Vivaldi APEX DAC, Upsampler Plus & matching Clock (Silver) Analogue Preamp:VAC Renaissance SE Phono stage in Silver Flake with XLR Output Option & with Nordost Valhalla XLR's. Analogue Sources:SME 20/2 w/SME V arm & Nordost Odin 2 Tone Arm Cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote (original owner since 1974). Vibration Control:TT on HRS M3X2-1921 shelf. Speakers:Wilson Audio Alexia V (on order in Ferrari Argento Silver/Parchment grills sitting on Acoustic Diode Kit). Power Cables:4 Nordost Odin Supreme Reference on amps, preamp & DAC. Ansuz Acoustics C2 on Transport & Clock. Power Distribution:Ansuz Mainz D3 Distributor & Ansuz Mainz C2 1M Power Cable Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2) on dedicated, same panel phase, 20A breakers. Speaker Cables:2M Nordost Odin 2 Supreme Reference on Nordost Sort Lifts. (on Order) Signal Cables:Nordost Odin XLR's on dCS DAC & Amps. Digital Cables: Nordost Odin 2's, 110-ohm AES/EBU on dCS Transport to DAC. Clock Cables:5 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital Ethernet Cable: WireWorld Platinum 1M Starlight® 8 Twinax Headphones:Vintage Koss Pro IV AA. RCM: Audio Desk PRO Tube Test Gear:Mint late '60's/calibrated Heathkit TT-1A, MaxiMatcher Power Amp & Preamp & Space Tech Labs ATT-3.02 tube test sets. |
#24
|
||||
|
||||
Moving up from the C2500 - opinions?
Which is why they show the units stacked in their marketing collateral. I’m confused, but that’s not unusual.
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v |
#25
|
|||
|
|||
Quote:
Agree I was confused as well after reading the manual and looking at the marketing pictures... |
#26
|
||||
|
||||
What I can say for sure is that the control unit makes very little heat.
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v |
#27
|
||||
|
||||
Quote:
+1. Just do not understand the direction in the manual. Written by the lawyers? The top of my controller never exceeds 80F. I have it measured.
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum Eclipse 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#28
|
||||
|
||||
Methinks tech pubs and marketing @McIntosh need to pow wow.
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v |
#29
|
|||
|
|||
No doubt - stacked probably looks better, is easier to image when marketing and looks more like one ‘unit’ rather than two separate pieces. Cover the a*s approach is per the manual...
|
#30
|
||||
|
||||
Moving up from the C2500 - opinions?
Stacked is the way to go, if you have the shelf space.....it just looks right. I’m fairly certain the manual is an error. Betcha they meant to say “do not stack the C1100C on top of the C1100T”. It’s the only conclusion that is logical. When the top of the C1100T has very little air space, like an overhead shelf or C1100C, the T gets really really hot.
__________________
Preamp: McIntosh C1100T/C1100C, McIntosh MX180 Amp: McIntosh MC611 (2), MC601 (3), MI254 Digital: McIntosh D1100, McIntosh MCT450, Meridian 808v6, Aurender N20, Aurender ACS10, Oppo 203 Analog: McIntosh MT10, Hana Umami Red Phono preamp: Simaudio Moon 610LP, 820S Signal cables: WW Gold Eclipse 7 speaker cables; Shunyata Sigma v2 XLR (2); Sigma v1 XLR (2), Transparent Ref XL (MM2) XLR; WW Silver Eclipse 7 (4) Digital cables: Shunyata Omega USB, Omega Ethernet, Sigma Ethernet; WW Platinum 7 Coax, AES/EBU Switch: Innuos PhoenixNet Power: Audioquest Niagara 7000, Audioquest 5000, Audioquest Dragon, Hurricane PC, Shunyata Alpha HC, AQ NRG Edison outlets, (8) 20 amp dedicated lines, 125 amp subpanel Speakers: Wilson Sasha DAW, Dynaudio Contour 30, Dynaudio Contour 25C Subs: REL s/812 (6), REL s/510 (3) Accessories: HRS M3X2 shelf (MT10), Stillpoints Ultra II v2 w/ bases (21), Ultra SS (12), Mini (12), LPi v1 Sound treaments: Artnovion |
|
|
Audio Aficionado Sponsors | |