#61
|
|||
|
|||
Guys
Thx for the tip, I will be trying it. Firstly i was going to take the black ground wire from my 2 REL S5/SHO subs remove them from their current connection on IEC screw (have Ayre products which are balanced making hooking up these subs tricky), add some more wire length to them (won't reach as of now) and connect to my Triton V3 CGS instead. Next, I will try creating a connector like Puma Cat did and then connect the Ayre preamp to CGS. |
#62
|
||||
|
||||
Esolecky... Welcome to AA!
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#63
|
|||
|
|||
|
#64
|
||||
|
||||
Quote:
Thanks
__________________
Paul Speakers: Von Schweikert VR-5 Anniversary MK II Front L/R, LCR-35 Center, VR-1 Rear L/R Sub: JL Audio F113 Amps: PS Audio BHK Signature 300 Mono, McIntosh MC207 Pre-Amp PS Audio BHK Signature and Gold Note PH-10 Phono Stage/PSU-10 Power Supply Turntable: VPI HR-X 12.7 TONEARM (2) and SDS, Stillpoints LPI Tape Deck Otari 5050B II2 Music Server: Aurender N100H Cartridges: Ortofon Cadenza Black, Lyra Helikon Mono Digital Source: Oppo UDP-205 DAC: Holo Audio Spring 3 KTE SSP: Marantz AV8801 Cables: Wireworld Electra 7 (P) Wireworld Silver Eclipse 7, Shunyata Delta NR (I) Wireworld Silver Eclipse 7 (S) Wireworld Platinum Starlight 7 (USB) AC Power Regeneration: PS Audio DirectStream P15 Power Plant and Shunyata Denali 6000s V2. |
#65
|
||||
|
||||
Not just any screw. Some may hold a part inside the component chassis. You want to stay away from those. As Caelin noted elsewhere (can't remember the source), generally speaking, screws located around the component case's perimeter are the "safe" ones to connect to.
__________________
Jim Bedroom: Aurender N150-->Bryston BDA-3-->EMIA Elmaformer Cu passive line stage-->conrad-johnson MF2500-->Paradigm Studio 20 v.5 Wireworld Eclipse IC and SC Shunyata Delta D6, Alpha XC, Delta NR v.2, Alpha USB; Altaira CG Hub Stillpoints Aperture II; Ultra SS; Ultra Mini GIK Monster; 242 Butcher Block Acoustics Maple Platforms Last edited by jimtranr; 12-18-2019 at 07:47 PM. |
#66
|
||||
|
||||
There’s two different grounds. Chassis and signal. Your chassis should be grounded through your AC ground cable which, if attached to a Triton or Denali, is already grounded through the Triton/Denali CGS ground system. The signal ground should be attached to the ground posts on the back of the Triton/Denali and to any unused RCA jack on your equipment.
Alternately if you have an amp or two etc that is NOT connected to the Triton/Denali through AC power but connected to the wall directly, then you attach their chassis to Triton/Denali ground terminals to take advantage of the CGS ground system. Someone please clarify if I have this wrong. Right now all my equipment is run through the Triton/Typhon QR and signal grounds run from unused RCA jacks to the Triton SGS/CGS terminals on the back of my Triton and the background is dead silent and pure. |
#67
|
||||
|
||||
Quote:
__________________
Paul Speakers: Von Schweikert VR-5 Anniversary MK II Front L/R, LCR-35 Center, VR-1 Rear L/R Sub: JL Audio F113 Amps: PS Audio BHK Signature 300 Mono, McIntosh MC207 Pre-Amp PS Audio BHK Signature and Gold Note PH-10 Phono Stage/PSU-10 Power Supply Turntable: VPI HR-X 12.7 TONEARM (2) and SDS, Stillpoints LPI Tape Deck Otari 5050B II2 Music Server: Aurender N100H Cartridges: Ortofon Cadenza Black, Lyra Helikon Mono Digital Source: Oppo UDP-205 DAC: Holo Audio Spring 3 KTE SSP: Marantz AV8801 Cables: Wireworld Electra 7 (P) Wireworld Silver Eclipse 7, Shunyata Delta NR (I) Wireworld Silver Eclipse 7 (S) Wireworld Platinum Starlight 7 (USB) AC Power Regeneration: PS Audio DirectStream P15 Power Plant and Shunyata Denali 6000s V2. |
#68
|
||||
|
||||
Quote:
__________________
Paul Speakers: Von Schweikert VR-5 Anniversary MK II Front L/R, LCR-35 Center, VR-1 Rear L/R Sub: JL Audio F113 Amps: PS Audio BHK Signature 300 Mono, McIntosh MC207 Pre-Amp PS Audio BHK Signature and Gold Note PH-10 Phono Stage/PSU-10 Power Supply Turntable: VPI HR-X 12.7 TONEARM (2) and SDS, Stillpoints LPI Tape Deck Otari 5050B II2 Music Server: Aurender N100H Cartridges: Ortofon Cadenza Black, Lyra Helikon Mono Digital Source: Oppo UDP-205 DAC: Holo Audio Spring 3 KTE SSP: Marantz AV8801 Cables: Wireworld Electra 7 (P) Wireworld Silver Eclipse 7, Shunyata Delta NR (I) Wireworld Silver Eclipse 7 (S) Wireworld Platinum Starlight 7 (USB) AC Power Regeneration: PS Audio DirectStream P15 Power Plant and Shunyata Denali 6000s V2. |
#69
|
||||
|
||||
Can anyone post a pic of how this is connected to their (Denali V1 in may case) - then to Pre-Amp. Do you connect more than 1 device to the Denali's ground?
__________________
Power: Sub-panel w 3 dedicated 20A breakers + EP-2050 Power Outlets: Furutech GTX-D NCF (R) Rack: Core Audio Designs Power Distribution: Shunyata Denali Amps: McIntosh MC2301 Pre-Amp: McIntosh C1100 Tubes: Genalex Gold Lions Digital: PS Audio DirectStream Junior: Roon Ready Signal Cables: WireWorld XLR's Speakers: Canton Reference K3's Speaker cables: WW Silver Eclipse 7 Analog: Dr. Feickert Woodpecker+Kuzma 4-point+Miyajima ETR-MONO SUT & Miyajima Infinity (Mono) // Hana Umami (Stereo) Tweaks: Shakti Stones, GIK Panels, IsoAcoustics Feet |
#70
|
|||
|
|||
On my frontend I connect three CGS terminals to equipment chassiscrews via small spade CGS10.
I also connect one of the CGS terminal on that TritonV3 to my Nordost Qkore 6. From the QKore6 I run signal ground to 3 frontend electronics(RCA) and two active DSP speakers (RCA). The result is absolute sublime! Last edited by crion2; 12-19-2019 at 11:42 AM. |
|
|
Audio Aficionado Sponsors | |