AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Aurender

Aurender Reference Music Servers

Reply
 
Thread Tools Display Modes
  #1  
Old 05-29-2018, 04:33 PM
ctzzzz ctzzzz is offline
Junior Member
 
Join Date: Feb 2018
Posts: 26
Lightbulb N10 better cable: USB or coax

Hi there
New owner of a N10 here, wondering what do you guys use as digital cable to your DACs.
Do you prefer USB or SPDIF interface?
Of course using USB the DAC's clock takes control and on coax the N10's clock steps into action.
If you also can name your cable brand of choice, that would be very interesting.
I for myself compared an Ultra USB from Transparent vs a (borrowed, unknown brand) coaxial. The results are mixed on my side, to be honest, that's why I want some advise from your experience.
I use an Accuphase DC37, don't know which clock is more refined, Accu's vs N10's.
Cheers, thanks in advance.
Reply With Quote
  #2  
Old 05-29-2018, 07:20 PM
jdandy's Avatar
jdandy jdandy is offline
Merry Christmas to all



 
Join Date: Apr 2009
Location: North Central Florida
Posts: 53,224
Default

ctzzzz.......I have two digital cables connected between my Aurender N10 and the Esoteric K-01X DAC, a Wireworld Platinum USB cable and a Wireworld Platinum Starlight coaxial cable. In this manner I can switch between the digital outputs on the N10 at will to accommodate PCM and DSD source material. My preference is to use the digital coaxial output that takes full advantage of the Aurender N10's oven controlled crystal oscillator (OCXO), and its extremely accurate and stable 12.8MHz clock with an accuracy of 0.02 parts per million (ppm).

The Accuphase DC37 DAC uses two ESS ES9018 eight channel DAC's, one for each left and right channel, that incorporate a 27 MHz crystal oscillator on the DAC chips. I was unable to find any published information with respect to the accuracy of these onboard oscillators. In all cases the chip based clock times all digital inputs to the DC37 DAC.

I would suggest you use the highest quality digital cables you can afford. It has been my experience that the Wireworld Platinum level cables have outperformed all the other digital cables I have used previously. I also suggest you spend plenty of time listening to both the Aurender N10's coaxial output and USB output to determine for yourself which connection offers you the most satisfaction.

If you haven't already, you may enjoy reading my Aurender N10 Caching Music Server review
__________________
Dan



STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario
LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113
VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A

Last edited by jdandy; 05-29-2018 at 11:21 PM.
Reply With Quote
  #3  
Old 05-29-2018, 10:26 PM
j3brow's Avatar
j3brow j3brow is offline
Member

 
Join Date: Apr 2009
Location: Baton Rouge, LA
Posts: 3,336
Default N10 better cable: USB or coax

ctzzzz .. I too own the N10 and I have (3) digital connections between the N10 and my DAC, the McIntosh D1100, which also uses the Sabre ESS9018 chip. I use Wireworld like so many others here at AA, namely Platinum USB, Platinum AES/EBU, and Platinum coaxial. I cannot hear any significant difference between the three. I love tweeks and I just had to hear all 3 for myself. The clock in my dac must be on same level with the clock in the N10, at least in the context of my system (speakers, room, ears). When I take back possession of my Meridian 808 (on long term load), I will compare all 3 with that dac, results could be different. I must say I was surprised I don’t have a real preference for the aes/coaxial over the usb as I’ve always had a prejudice against usb based on the general feelings towards usb in hi-do circles. Having a WW Usb cable helps
__________________

Preamp: McIntosh C1100T/C1100C, McIntosh MX180
Amp: McIntosh MC611 (2), MC601 (3), MI254
Digital: McIntosh D1100, McIntosh MCT450, Meridian 808v6, Aurender N20, Aurender ACS10, Oppo 203
Analog: McIntosh MT10, Hana Umami Red
Phono preamp: Simaudio Moon 610LP, 820S
Signal cables: WW Gold Eclipse 7 speaker cables; Shunyata Sigma v2 XLR (2); Sigma v1 XLR (2), Transparent Ref XL (MM2) XLR; WW Silver Eclipse 7 (4)
Digital cables: Shunyata Omega USB, Omega Ethernet, Sigma Ethernet; WW Platinum 7 Coax, AES/EBU
Switch: Innuos PhoenixNet
Power: Audioquest Niagara 7000, Audioquest 5000, Audioquest Dragon, Hurricane PC, Shunyata Alpha HC, AQ NRG Edison outlets, (8) 20 amp dedicated lines, 125 amp subpanel
Speakers: Wilson Sasha DAW, Dynaudio Contour 30, Dynaudio Contour 25C
Subs: REL s/812 (6), REL s/510 (3)
Accessories: HRS M3X2 shelf (MT10), Stillpoints Ultra II v2 w/ bases (21), Ultra SS (12), Mini (12), LPi v1
Sound treaments: Artnovion
Reply With Quote
  #4  
Old 05-29-2018, 10:51 PM
PMCH's Avatar
PMCH PMCH is online now
Senior Member

 
Join Date: Feb 2010
Location: Cleveland suburbs
Posts: 1,462
Default

ctzzzz, another N10 owner here with another opinion to add confusion. I prefer connecting my N10 to my Berkeley or my K-01x via a WW Platinum USB but also going through an iFi USB. For me it sounds better than via coax. You may wish to demo a few cables through the Cable Co. to decide for yourself what sounds better to you.
__________________
Paul

Harbeth 40.3 XD, Sound Anchor stands w/ Stillpoints, Luxman M900 & C900, Aurender N20, Jay's Audio CDT3 - MK3 CD player, Mola Mola Tambaqui DAC, Shunyata Denali 6000/s V2, Altaira
Reply With Quote
  #5  
Old 05-30-2018, 12:42 AM
ctzzzz ctzzzz is offline
Junior Member
 
Join Date: Feb 2018
Posts: 26
Default

Dan, @j3brow, Paul:
Thank you all for the answers.
I'm still in the burn in phase with my N10 (about 120-130hours).
I'll try to borrow the best cables available and indeed, listen for myself. I also have a friend that has an Intona USB isolator, probably I'll put this also in the mix.
My DAC does not have an AES input, but if there are other users who compared USB vs Coax on N10, their input is highly appreciated, for sure.

Last edited by ctzzzz; 05-30-2018 at 01:06 AM.
Reply With Quote
  #6  
Old 05-31-2018, 02:11 PM
medwardo medwardo is offline
Guest
 
Join Date: Jun 2012
Location: Seattle area
Posts: 143
Default

@ctzzz...I've got an N10 and have used coax, USB, and AES. My preference is for the coax, followed by the AES, and then the USB cables. But, they are very, very close and somewhat music dependent. Your ears will be the best judge on your system. My cables are Shunyata Sigma and Audience SX USB.
Reply With Quote
  #7  
Old 05-31-2018, 02:41 PM
ctzzzz ctzzzz is offline
Junior Member
 
Join Date: Feb 2018
Posts: 26
Default

Quote:
Originally Posted by medwardo View Post
@ctzzz...I've got an N10 and have used coax, USB, and AES. My preference is for the coax, followed by the AES, and then the USB cables. But, they are very, very close and somewhat music dependent. Your ears will be the best judge on your system. My cables are Shunyata Sigma and Audience SX USB.
Thank you, Medwardo!
__________________
Wilson Audio Sasha W/P II, LAMM M1.2, LAMM L2, Weiss 502, Siltech Crown.
Reply With Quote
  #8  
Old 06-17-2018, 04:42 PM
GreginNH1's Avatar
GreginNH1 GreginNH1 is offline
Senior Member

 
Join Date: Jun 2015
Location: Concord, NH
Posts: 1,890
Default

USB connected to my Esoteric K-01X sounds better than COAX in my rig.
__________________
Audio Room: CH Precision I1, Esoteric k01XD, Lab 12 Melto 2, Luxman PD-171A TT, Roon Nucleus, Stenheim Alumine Three, Silversmith Fidelium speaker cables, Siltech 680 interconnects, Shunyata Sigma USB Cable, Audioquest Hurricane PCs, Shunyata Everest,CORE Design racks, Stein Harmonizers, HRS damping plates, Stillpoints and all that other silly stuff.

Office: Luxman L-595A SE, Diapason Neos speakers, HiFi Rose RS150B, Nordost Frey 2 Interconnects, Tellurium Q Silver speaker cables,
Reply With Quote
  #9  
Old 06-18-2018, 05:51 AM
imprezap2's Avatar
imprezap2 imprezap2 is offline
Member
 
Join Date: Jan 2013
Location: europe
Posts: 1,122
Default

It also depends on the DAC that is being used, some DAC's prefer USB input while others prefer SPDIF.

As Dan mentioned the N10 should be best with the SPDIF output (special internal clock not used with USB)
__________________
Moon 700i V2, dCS Rossini, YG Acoustics Hailey, Aurender N10, Ansuz Mainz D2
Reply With Quote
  #10  
Old 06-20-2018, 04:10 PM
bigblue bigblue is offline
Guest
 
Join Date: Feb 2012
Posts: 537
Default

+1
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 05:37 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video