#11
|
|||
|
|||
Quote:
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. |
#12
|
|||
|
|||
Ron
Actually the one that came in the box with mine was a 4 gb. I imagine the smaller sizes are getting harder for them to buy.
__________________
Jack |
#13
|
||||
|
||||
They sent one with mine and with my dmp. Both work fine.
|
#14
|
||||
|
||||
Here is the FAQ's from PS Audio.
Several PS Audio products use Secure Digital (SD) cards for various purposes. The most prevalent use is for updating the firmware in the internal microprocessors. Earlier PS Audio products (circa 2009-2010) were restricted to using SD cards that had a size limit of 2GB max. More recently, products (like DirectStream) have been tested with SD cards with up to 8GB capacity. Higher capacity cards may work but have not been tested. If your product is earlier than DirectStream, you are limited to a maximum of 2GB SD cards. SD Cards specifics All files must be in the root directory of the SD card, and not in a zip file or a subdirectory. If you get the option to format FAT-16, use it, if you don’t get the option to format FAT-16, format FAT-32 . exFAT or NTFS WILL NOT WORK Windows 1-4Gb Format FAT-16 4-32Gb Format FAT-32 32Gb won’t work unless formatted FAT-32. exFAT will not work MAC 1-32Gb Format MS-DOS(FAT) 32Gb won’t work unless formatted MS-DOS(FAT). exFAT will not work SD cards are designed to be used in many different applications. The PS Audio applications require that the SD memory card be formatted using the FAT16 standard. On a Windows computer, to format an SD card, insert the card into the proper SD card slot, or if your computer does not have one, purchase an SD card reader and connect it to your computer. Now, with the card installed in the reader, find the SD card in your Windows file explorer, and right click it. This will bring up a pop-up. One of the choices will be to format the card. Left clicking Format will bring up another pop-up that allows you to do the formatting. One of the choices in this window is to choose which formatting standard to use. If you have a larger than 4GB SD card, it will say that FAT32 is the default. Click on this pull down menu, and choose FAT instead. Then proceed to format the SD card. Files you download, or have emailed to you may be either direct, or may be zipped (processed to minimize the size and combine the files all into one). If they are zipped, they will have a .zip extension at the end of the file name. If they are not zipped, the 3 digit extension will say something like .hex, or .cfg, or something similar. If the files are not zipped, you just have to copy them from the source to the SD card. If they have been zipped, you must use a computer program to unzip them. Your computer may already have an unzipping program installed. You can test this by double clicking the zip file. If you have such a program, the file will start the unzipping program. You then can follow the instructions for this program to unzip the files and copy them to the SD card. If you do not have an unzipping program, you should either obtain one, or ask for the files to be resent to you in an unzipped format. The PS Audio firmware update process requires that the files be readable directly on the SD card. If you look at the files on the SD card with your file explorer program (Explore in Windows, Finder in Apple), you should see the several files available when you look at the SD card. If instead you see a folder that you have to click on before you see the files, they will not load. In this case, you need to move the files from the folder to the top level of the SD card directory. If you have trouble copying files to the SD card, take a look at the card itself. On the side of the card you will see a small slider switch. Make sure this switch is in the ‘unlock’ position. Ron
__________________
Ron Processor: McIntosh MX170, Amp: Legacy Audio i-V7, Digital: Benchmark DAC3B, Roon Music Player, Oppo UDP-205, Apple TV 4K, Fire TV Stick 4K Max, Analog: Gold Note Pianosa Turntable, Gold Note PH-10 Phono Preamplifier, Donatello MC Cartridge, Speakers: Legacy Audio Signature SE Natural Sapele Pommele, Silverscreen HD Center, JL Audio e112-Gloss Sub |
#15
|
|||
|
|||
For what it’s worth. I’ve used 16gb -new out of the box sd cards. I don’t format the card in my win 10 laptop. Copy files to the local drive - then put the files on the root of the Sd card from my hard drive. Easy peasy and have never had any issue. I’ve upgraded from Yale ->Torrey’s-A->Torrey’s-B->Torrey’s final->Huron->Redcloud -> Snowmass. All of these have been done with a combo of brand new cards ranging from 2-16gb cards. But always new out of box in each case. I have never had an issue.
|
#16
|
|||
|
|||
Quote:
|
#17
|
|||
|
|||
Quote:
Best, Thanh
__________________
Amps: Mc611s; Bryston 9BST Speakers: B&W 802D3, HTM1D3, B&W SCMs, 2x REL Carbon Special + Analysis Plus REL SpeakOn cable; Pre-Amp: C2700; Processor: Marantz 8805A Sources: Aurender N20; PSA Directstream DAC; JVC RS2000; Stewart Screen Cabaret with StudioTek 130 G4; Oppo UDP-205; Power & Cables: Taralabs bi-wire; WW XLR Silver Eclipse 8; WW Silver Starlight 7 Coax; Denali 6000T, Shunyata Alpha, Delta and Venom. |
#18
|
||||
|
||||
Quote:
How do you plan to "drive" it? USB? Ethernet via the Bridge II card? After some experimentation, I found that the Bridge II sounded better than the USB input. That also got the computer out of the equipment rack, tidying things up a bit.
__________________
Kevin |
#19
|
|||
|
|||
4N6-
Can you talk about your changes a bit? What was your usb setup before? What is your setup now? Were you using a regen or any other product for usb- and what were the improvements? I currently use jriver w an audio quest diamond usb cable outbound to a wyred4sound recovery unit. |
#20
|
||||
|
||||
timm-
I used to have a Silenzio server connected to my DS DAC via Wireworld Platinum Starlight USB. I have used USB "filtration/reclocking" doohickeys from PS Audio, Uptone, Audioquest and Wyred4Sound. When they actually passed along a signal that the DAC could lock to (which was sporadic at best), the sound was a tad smoother, especially with the Uptone and W4S products. Not sure if they were actually cleaning up the signal (removing noise and lowering jitter), or doing some digital filtration that altered the signal to make it more "pleasing". As alluded to, I kept having problems with the DAC losing connection to the signal stream with those products in the chain, so ended up removing them. Then I installed the Bridge II and use Cat 6 Ethernet to get the signal to the DS DAC. The Silenzio is now upstairs. No signal loss and a definite improvement in sound quality over USB. If one looks at the PS Audio forums, I believe that a majority of people would agree with that assessment. There are some who have found other units to act as a network "receiver" other than the Bridge II. I have no experience with these so can't comment much. Most use a USB connection at the end so are of no interest to me. Many others also say that the I2S input is the best for the DS DAC...better than either the Bridge II/ethernet or USB. That is what makes me interested in the W4S music server which has an I2S output. Yes, I would have to have a computer in the equipment rack, but then I could hook it up to the DS DAC via I2S rather than USB. Would love to try one to see if it would be a worthwhile upgrade from the Silenzio.
__________________
Kevin |
|
|
Audio Aficionado Sponsors | |