#1
|
||||
|
||||
Voltage
I would like some input on the following issue please:-
Luxman products come with 115V badges on the back of the units. I have a PS audio PPP that I set to 120V output. Does this have a long term effect on the internals of the Luxman? I'm i better off setting the output of the PPP to 115V? Should there be any sonic differences between the two voltage settings? Any input is greatly appreciated. Thanks. Charles.
__________________
Melco N1ZH60/2 ---> EtherRegen ---> Bricasti M1 SE DAC ---> ASR Emitter II Exclusive Version Blue w/Battery PSU ---> Eggleston Andra III speakers rolling on Stillpoints Ultra 5's ----> Dual Rythmik E15 Subs ---> all tied together Via MIT MA-X RCA IC and MIT Matrix SHD120 Rev.2 Bi-Wire speaker cables. |
#2
|
||||
|
||||
That's 5% difference, that should be well within the limits of the Luxman. But it would still be best setting the output of the PPP. You shouldn't notice any impact on the sound.
|
|
|
Audio Aficionado Sponsors | |