|
VPI Industries Turntables Made in USA |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
VPI Prime Signature - feet adjustable?
I finally got some time to try to finish up the setup on my turntable.
I was under the impression that the feet are adjustable, they don't seem to be. The stand is level but the table is not. Am I missing something here? |
#2
|
||||
|
||||
From page 2 of the manual:
“Verify the turntable is level by using a 9 or 12-inch bubble level front-to-back and side-to-side on the platter. If it is not level, rotate the cone feet up or down. If you must turn the Prime feet more than three full turns, level the shelf or platform the table sits on first.”
__________________
Tony D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2 |
#3
|
|||
|
|||
Quote:
|
#4
|
||||
|
||||
Quote:
Perhaps something in the design has changed, I just pulled that from the manual on the VPI website.
__________________
Tony D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2 |
#5
|
|||
|
|||
Quote:
After a long talk with my dealer and VPI I have figured out the issue. The only way I can explain it is you have to overcome the resistance of the rubber feet which is significant, once you do it will "break" free and than they work appropriately. |
#6
|
||||
|
||||
Exactly, you feel like you could have potentially damaged them.
Quote:
__________________
Living Room Audio research LS28SE preamplifier, Aurender N10 Streamer, Topping D90 DAC, McIntosh MC462 amplifier. Focal Sopra 3 speakers. Salamander Archetype rack, Symposium Acoustics Segue shelves, Silver Eclipse 7 XLRs, Shunyata Everest power conditioner, Alpha V2, Delta V2 and Venom V2 10/12 power cords, and Audioquest Oak speaker cables. GIK Acoustic's bass soffits and 244 bass trap Art panels room treatments. Sony XBR75X900e 4K TV and Sony UBP-X800 Blu-ray player |
#7
|
||||
|
||||
I just had this exact same issue when I bought my Prime signature a few months ago. They stick a bit and you feel the rubber flexing you have to keep turning it until the bolt actually breaks loose. I verified this with my dealer and then directly with VPI because I felt like I was over torquing it and I didn't want to put too much pressure. Once I got the blessing from them that is how it works I applied a little more pressure and they came free and I was able to adjust them and level it.
__________________
Living Room Audio research LS28SE preamplifier, Aurender N10 Streamer, Topping D90 DAC, McIntosh MC462 amplifier. Focal Sopra 3 speakers. Salamander Archetype rack, Symposium Acoustics Segue shelves, Silver Eclipse 7 XLRs, Shunyata Everest power conditioner, Alpha V2, Delta V2 and Venom V2 10/12 power cords, and Audioquest Oak speaker cables. GIK Acoustic's bass soffits and 244 bass trap Art panels room treatments. Sony XBR75X900e 4K TV and Sony UBP-X800 Blu-ray player |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |