|
Stillpoints Lower Your Noise Floor |
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Quote:
Despite that information being out there, some seem to suggest attaching the speaker adapter to the wide end (bottom) of the Stillpoint Ultra SS, and orienting it hard hat (tapered side) down. Obviously I have little choice but to use this type of orientation with Ultra 5's when I try those. The question that I don't have an answer to is what purpose the hard hat would serve if it's attached to the wider end of the Stillpoint, and used as the point of contact with the floor. It no longer serves to isolate the speaker or component from the technology pocket. The best answer I come up with is for leveling purposes of the speaker, perhaps. Otherwise I see the hard hat on the wide end of the Stillpoint Ultra SS as an area of possible instability. Presently, I use the speaker adapters and spikes on the Ultra SS's (as pictured below), but I'm not crazy about the spikes stability on my floors, so I'm considering the Ultra 5's or using the Ultra SS's in a different orientation. Whether or not to use the outriggers or attach directly to the bottom of the speaker is whole different issue. My gut says the outriggers on these speakers don't help the sound when using Stillpoints. I'll play around with that after I decide which works best on outriggers.
__________________
Christian south: Mark Levinson No. 52 pre, Bricasti M28 amps, Lumin A1, Oppo BDP-205, Pioneer CT-43, Sony SS-AR1 Speakers, Audioquest Dragon PCs, Audioquest speaker cables, Audioquest interconnects, HB Power Design Powerslave Star Galaxy power distributor north: Vitus SIA-030, Luxman D10X, Sony TC-KA3ES, Harbeth 40.2, Siltech cables |
#22
|
|||
|
|||
Quote:
And I agree with your take on the hard hat; when used with a threaded adapter, it allows for leveling, but then again so does attachment with the adapter alone. I'd probably take off the hats if I used the UltraSS with speakers and adapters. That's where the Ultra5s really work well for speakers; they're wide so stability is not an issue and they have more technology pockets. If you had Ultra5s on the speaker bases and the speakers were stable, maybe you don't need the outriggers or the spikes. Pricey, yeah, but they'll always work and never wear out. That's one of the nice things about Stillpoints - they trickle down well. |
#23
|
||||
|
||||
How about with Bryston Model T?
Ivan:
I know you suggested a solution (which I purchased) for "pucks" to put under the outrigger spikes for my future Model T's. How would you integrate Stillpoints into the Model T setup? Always curious... Steve
__________________
Analog: VPI Classic Direct (12" Fatboy) with Ortofon A95 cartridge; Ortofon ST-80SE Transformer; McIntosh C2500. Digital: SilenZio Gen 3 High Performance Media Server; Esoteric K-03X. Supporting System: McIntosh MX122 A/V Center; MC205 Amplifier; Bryston 14bSST2 Amplifier; PS Audio P10 Power Reconditioner; Revel Salon 2 Mains; Revel Voice 2 CC; JL Audio f113v2 (2); JL Audio CR-1 Crossover; Focal IC1002 Surrounds |
#24
|
||||
|
||||
Stillpoints under speakers - spikes or no spikes?
[emoji52]
__________________
Avid Acutus SP, NO ARM, Benz Micro LP-S, Whest Audio PS.40RDT SE, PS Audio DSMP+DS DAC, Simaudio Moon 700i, Dali Epicon 6, Simaudio Moon Nēo 430HAD, HiFiMan HE-1000v2, Chord Sarum SA XLR, RCA, USB, Chord Sarum speaker, Nordost Vishnu power, Furutech plugs, PS Audio P10+Chord Sarum SA power, Stillpoints Ultra SS, Ultra Mini and LPI, HiFi Racks rack, Audio Desk Systeme PRO+Keith Monks Omni RCM Last edited by John49; 02-23-2017 at 06:03 AM. Reason: Edited after reading past posts |
#25
|
|||
|
|||
On my TAD R1 MK2s, I use Ultra5s with no spikes. Threaded inserts into bottom of the R1s with beveled edge of the Ultra5s down. Stillpoints logo then is next to bottom of speakers. With the R1s, spikes on Ultra5s were tried but the config was not good and speakers could not be moved without risking breaking off the bolts on bottom of speakers due to 330 lb weight of each and the smallish 1/4-20 threaded insert on back of the Ultra5a, so "No Spikes!". The sound improvement with Ultra5s was well worth the price...
|
#26
|
||||
|
||||
I do the same as SCAudiophile: Ultra 5s, bevel down, no spikes.
|
#27
|
||||
|
||||
On my Aida's I have the Black Ultra 5's bevel up, no adapters. They look better that way, and sound amazing.
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#28
|
|||
|
|||
So they are not attached at all, the speakers just sit on the magic side of the Ultra5s, correct?
|
#29
|
||||
|
||||
Yes, that is correct; Aida does not have any threads on the bottom.
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#30
|
||||
|
||||
I am very grateful to all my fellow AA'ers for broadening this thread. For my financial sanity, I shall use Ultra SSs, adapters, no spikes on up-coming Dali Epicon 6s. As for the orientation, I will try speaker base, adapter, SS 'technology pocket', no hard hat, carpet. I may possibly add the hard hat back in to see which is best, if only aesthetically.
__________________
Avid Acutus SP, NO ARM, Benz Micro LP-S, Whest Audio PS.40RDT SE, PS Audio DSMP+DS DAC, Simaudio Moon 700i, Dali Epicon 6, Simaudio Moon Nēo 430HAD, HiFiMan HE-1000v2, Chord Sarum SA XLR, RCA, USB, Chord Sarum speaker, Nordost Vishnu power, Furutech plugs, PS Audio P10+Chord Sarum SA power, Stillpoints Ultra SS, Ultra Mini and LPI, HiFi Racks rack, Audio Desk Systeme PRO+Keith Monks Omni RCM |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |