d1100/c1100 integration

[joey_corleoni]

Hello friends,

I pulled the trigger on a new d1100! Seems, they are back ordered for a few weeks from mother base in upstate NY, but I figured while I was waiting I would start getting things setup and get comfortable with the documentation

I already own a c1100 pre-amp, and of course will be integrating it with the d1100. I have a few simple questions that are not really covered explicitly in the manual

1) Input control - How does one use the c1100 to control the input being selected on the d1100? It just sort of says that this happens. For example, say I have a CD player going to the d1100 using optical 1 and a computer going to the USB input. The d1100 itself is connected to the c1100 on balanced6 as explained in the guide, and also connected to the c1100 with the special control cable. How does one control if the d1100 is on the optical1 input or the USB input from the c1100?

I am *guessing* that when you cycle through the inputs using the c1100 front panel or remote, it will simply start cycling through the inputs on the d1100 as well, but I really have no idea. Do I still have to select balanced6 on the c1100? What about the c1100 display? When you are using the d1100, what does the c1100 display look like?

2) I currently don't use balanced input 6 on my c1100 so it is set to "off". Do I need to go in and manually turn it back "on" in preparation for my new d1100?

3) The manual states that when you use the d1100 as a DAC, it will power on with the pre-amp. Is this regardless of input selected on the c1100? For example, if I am playing a record and have the MC phono input selected, does the d1100 still come on? Also, do I still need to connect the d1100 itself to AC power, or does it draw power from the c1100 over the proprietary cable link?

4) Meters - If I shut off the meters on the c1100, will the meters go off on the d1100 also?

5) I read there were some early firmware issues and that the c1100 and d1100 should be on the latest. My c1100 is running v2.01. Anybody know what the latest c1100 code is, and what the latest d1100 firmware is? I also asked the dealer to make sure the d1100 has the latest firmware when it arrives.

6) I recently switched my digital front end software to roon. I have a roon core setup on a server, and use a raspberry pi 2b that runs roon bridge. I had this connected via USB to a Bryston BDA-3 and it was working beautifully. I was just wondering if anybody else is using the d1100 USB input with a linux based USB source and if it is working OK for you without any messing around

Thanks guys!