AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Magnepan

Magnepan Full-range ribbon and planar speakers

Reply
 
Thread Tools Display Modes
  #1  
Old 03-29-2020, 08:04 PM
Beet Farmer Beet Farmer is offline
Senior Member
 
Join Date: Oct 2018
Posts: 115
Default Two year Magnepan 20.7 ownership anniversary passes

Last week I note on my phone calendar the two year anniversary of owning my Magnepan 20.7 Speakers.
I cannot believe it has been two years. Time flies when you enjoy something so much.

I can say it took eight months for them to 'break in'
(one reason may have been I never blasted them, or played them loud. Always just a moderate level.)
The main problem of not broken in was a lack of low level detail at... lower levels. Seemed like the low level details just vanished when playing at less than moderately louder levels.
I was pretty sure this was due to not broken in. So I did not worry. and yes I was correct. Jut it did take a lot longer than I ever thought it would.

Changing the midrange resistors was very helpful for clarity. And I learned a fact that the mirange resistors alter the TONE of the midrange (as their real purpose) lower resistance (or no resistor at all) raises the tone average, and a larger resistor lowers the main tone This all in a very smal lrange between zero and three Ohms. After a lot of experimenting with less expensive resistors, and then narrowing it down with Duelund CAST and later Path Audio resistors. I came to a final (for MY speakers in My roomand MY listening) of three parallel resistors for a total of a 1.3 Ohms resistance made up of two Path Audio 3.9 Ohm and one Duelund CAST 3.9 ohm. (A side note about the Duelund. the leads are VERY fragile silver, and work harden rapidly (bending them back and forth a few times) and BREAK OFF way too easily. I made a carrier out of a wood dowel (this also allowed me to wrap the lead wire as a coil of about 8 turns which further smoothed the sound a tiny bit) to hold the Duelund (and the other two together_ so the Duelund leads do not get stressed. I lost two of them.. just to mention, the leads break off right at the place the exit the resistor, so leaving the resistor useless)

And the final thing on the speakers was the placement of exotic wood under the OEM oval base. I tried different woods and the final choice was 1.5" square by 6"and 12" and 18" long spindles of Bloodwood. (arranged like the shape of the oval though the middles ones angled a lot A total of 2x the 6: 4 times the 12 : and 2 of the 18: under each base.This last just brought out a lovely tone particularly natural sounding lower mids due to the wood under the speaker.
One oddity was when the wood had sunk into the carpet after a day, the tone was lost. I had to place small dominoes sized bits under the ends of all the Bloodwood to keep them from sinking into and thus being muffled.. This was a good solution, as I have had the Bloodwood under the speakers for many months and am very happy.

One final result has been my audio magazines have sat unread... I just have no interest in chasing anything ANYTHING any more (at least for the foreseeable future. LOL)
Reply With Quote
  #2  
Old 03-30-2020, 07:05 PM
gadawg gadawg is offline
Guest
 
Join Date: Mar 2014
Location: Prosper TX
Posts: 847
Default

Congrats on reaching audio nirvana if even only for a while!

George
Reply With Quote
  #3  
Old 04-03-2020, 04:50 PM
Beet Farmer Beet Farmer is offline
Senior Member
 
Join Date: Oct 2018
Posts: 115
Default

Thank you. It is true I am in a resting phase now...
Perhaps in a few years I may decide MORE is needed.
I can see a few extra better IC and a new phono cartridge (Orotofon Bronze?) but that is not in the current cash flow plans
But in general I am very pleased with the sound I have now.
Reply With Quote
  #4  
Old 08-25-2020, 06:28 PM
djmadden djmadden is offline
Junior Member
 
Join Date: Aug 2020
Posts: 1
Default From a Fellow 20.7er

Hi Beet Farmer,
I have read the thread you started on resistors and found it helpful. However, I am very unschooled in the best way to attach resistors to the speakers. I have searched in vain for images showing how they are hooked up. Would you please post a picture or two of your solution(s) and any helpful advice on best practices?
David in NorCal (cough, cough, so much smoke!)
Reply With Quote
  #5  
Old 08-25-2020, 08:52 PM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 78,483
Default

djmadden... Welcome to AA!
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES
Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES
Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 07:25 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video