#71
|
|||
|
|||
Yes indeed....made up some ground the past few weeks since I had finished up a few of the other project that were going on.
|
#72
|
|||
|
|||
Picked up more stuff for the listeng room......two Billy Bags Pro 30 stands, one Pro 1.5-5 stand, 10 Vicoustics Wavewood panels, one HRS M3X isolation platform for the AMG table and three HRS S1 platforms for the CA Innovation / Woodpecker and Avid tables.....its gonna be a bummer when I have to lug all this stuff from the living room to the new room
Last edited by Removed; 09-01-2012 at 03:39 PM. |
#73
|
||||
|
||||
Don't forget to lift with your legs Jeff
Those BB Pro-stands are mighty fine, enjoy!! Sent from my iPhone using A.Aficionado |
#74
|
|||
|
|||
Great news Jeff! Can't wait to see pictures of the finished room.
Mike
__________________
Mike |
#75
|
|||
|
|||
Maybe I should have my Chiropractor on speed dial
|
#76
|
|||
|
|||
Me too.....
|
#77
|
|||
|
|||
Made a few plan changes, decided on a staggered stud wall in which I'll end up with a 6 full inch air space and moving to 3 layer sheet rock application as adds mass.......The cieling will be a staggered stud application also but only two layers of sheet rock. I also decided against the floating floor as too many issues can arise, there is an excellent damping product I'm going to use along with the dual layer sub floor, should end up with a bit over 1.5 inches there. Another change was instead of having the left side wall be continous from front to back I notched it wider by three feet for 9 feet of the wall to create a alcove at the back part of the room, this will allow me to ditch the exterior door I was planning and going with a door that leads into the rest of the house plus the alcove will be perfect for LP storage.....also by eliminating the exterior door I can keep the window that would have had to come out, I will however replace it with a custom sound proof one, checking these out now.....if anyone building or planning on building soon here is a pic of the different wall types......
Last edited by Removed; 09-02-2012 at 12:46 AM. |
#78
|
||||
|
||||
I'm curious about those Vicoustic panels. That is going to be one impressive room when you are finished.
__________________
C2300 (Telefunkin Smooth plates); MC275 (Shuguang Treasure KT88 & Psvane signal); Sonus Faber Cremona Auditor M; JL F112; Clearaudio Concept MC; Oppo BDP-93; Squeezebox Touch; Music Hall dac23.5 (Burson Op amps, Mundorf & Multicaps, Vampire RCA jacks, Amperex White label 6922); Wireworld Silver Electra PC's, IC's, & SC's; HiFi Tuning |
#79
|
|||
|
|||
The Vicoustic panels are nice, I just completed a room for a customer and used several of the wavewood model......one thing I did learn is using just a few is not very effective, it really takes several in a particular area for good results. I plan using 12 2'x2' wavewood panels on the wall behind the speakers to start with. I also have a case of Multifuser from them to mess around with also......
|
#80
|
|||
|
|||
Another addition for the new room.....tonearm/cartridge locker
|
|
|
Audio Aficionado Sponsors | |