#1
|
|||
|
|||
Arrival of BDP-3
The BDP-3 arrived on Thursday and finally had a chance to get it set up Saturday evening. Discovering that mounting the SSD required a Torx driver smaller than my smallest, it's on hold until the proper size arrives tomorrow. Here are a few pictures for those interested:
1. Back panel, the antennas for the WiFi screw in, one shown mounted, the other un-mounted to the left side. They bend, twist and rotate. An inexpensive RCA to BNC adapter will allow use of an RCA Coax cable for the time being. 2. A Torx 10 is required to remove case screws for internal access. 3. Interior view. The SSD will mount in the front center on the included screws. Also a Torx screw, they look to be a number 6.
__________________
AKA J2Ordan McIntosh/Legacy/VPI/Bricasti/DIYCable |
|
|
Audio Aficionado Sponsors | |