AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Ayre

Ayre A new dimension of musical enjoyment

Reply
 
Thread Tools Display Modes
  #11  
Old 06-26-2018, 02:44 PM
dbphd dbphd is offline
Senior Member
 
Join Date: Feb 2017
Location: Montecito, CA
Posts: 154
Default

I've decided to remove the Bryston 10B entirely, and use the Velodyne SMS-1 bass manager to set the low-pass crossover to the subs. I've been reluctant to use the SMS-1 for this because it requires a video monitor, and there are so many parameters that can be set, but a careful reading of the manual suggests I need go no deeper than adjusting the crossover then letting the SMS-1 run in auto mode to do the rest of the setup from its acoustic measurements. Given the LS50s are running full range, I want to creep up to the steep rolloff point to reduce overlap, so I'll start at 50 Hz and leave the slope at the default 24 dB/octave of the SMS-1.

db
Reply With Quote
  #12  
Old 06-29-2018, 06:07 AM
dbphd dbphd is offline
Senior Member
 
Join Date: Feb 2017
Location: Montecito, CA
Posts: 154
Default

Removing the Bryston 10B and using the Velodyne SMS-1 bass manager to low-pass to the subs below 50 Hz restored the Ayre sound and simulates well a high-quality full-range setup.

db
Reply With Quote
  #13  
Old 07-14-2018, 11:08 PM
Blackstone Blackstone is offline
Guest
 
Join Date: Apr 2013
Location: USA
Posts: 224
Default Breaking KX-5 VX-5 link

Bryston makes great stuff, I used their Headphone amp for years and 3B-ST for 16 years, but putting anything in between two Ayre 5 series components is madness!
Reply With Quote
  #14  
Old 03-01-2019, 10:04 PM
dbphd dbphd is offline
Senior Member
 
Join Date: Feb 2017
Location: Montecito, CA
Posts: 154
Default

Although I'm happy using 40 Hz low-pass with 24db/octave slope with KEF Ref 1s and a pair of Velodyne HGS-10s with SMS-1 room correction, I still ask if there is no high-pass filter that could be inserted a KX-5/20 and VX-5/20.
Reply With Quote
  #15  
Old 03-09-2019, 06:44 AM
dbphd dbphd is offline
Senior Member
 
Join Date: Feb 2017
Location: Montecito, CA
Posts: 154
Default

Would a Marchand passive fully-balanced 24 dB/octave 80 Hz filter do no harm inserted between a KX-5/20 and VX-5/20? My understanding is less than complete, but I think the goal is maintaining zero feedback. Would passive do that?
Reply With Quote
  #16  
Old 04-15-2019, 10:52 PM
dbphd dbphd is offline
Senior Member
 
Join Date: Feb 2017
Location: Montecito, CA
Posts: 154
Default

I've now inserted a Marchand fully balanced 80 Hz 24 dB/octave filter between my KX-5/20 and VX-5/20 with no harm to the Ayre sound that I perceive.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 08:17 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
ęCopyright 2009-2019 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Acoustic Sciences Corportation
Acoustic Sciences Corportation
Legend Audio & Video
Legend Audio & Video
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Accuphase
Accuphase