#91
|
||||
|
||||
Quote:
I have no complaints about the sound, but I don't like the drooping IECs either. I'm pleased with the smoothness the Electra brought over the Aurora 5 it replaced. Not a complete surprise, but a nice result.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#92
|
||||
|
||||
Charles... on rare ocassion I will use these by Voodoo. They are the highest quality IEC right angle connectors available. I stock every possible angle/version. They eliminate the problem for good.
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#93
|
|||
|
|||
Quote:
|
#94
|
|||
|
|||
I know all of the Wireworld power cables are 12AWG but are you noticing they get perhaps heavier as you move up the lineup? If that was the case I suppose putting the lighter ones on components where the IEC's were drooping might be another alternative.
|
#95
|
||||
|
||||
Heavier because of length, perhaps. The 1m Electra was much easier to reposition than the 1.5m and 2m cords.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#96
|
||||
|
||||
I saw those last time I looked at VooDoo's website, but thought nothing of it. Now, I may need several. Those are the vertical connectors, it looks like. There's a horizontal version as well. They look like they'd take care of the problem for sure. I will have to assess my connections; some pieces of gear may do better with one over the other. And good adaptors are better than buying all new power cords (probably not WW, unfortunately).
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#97
|
||||
|
||||
Quote:
But I'm now using another velcro tie on the back of the rack with the cord and the connection is holding. I lifted the cord to provide some slack and and connected the cord to the cable management slot on the back of the Sanus rack. You can make out the velcro tie near the bottom of the second photo.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
|
|
Audio Aficionado Sponsors | |