What cable do you use

[FDPDK]

I use Powercord Cardas golden reference for Accuphase E-470
Powercord to CD-Player Gigawatt LC1-MK3
Loudspeaker bi wire is Yter
From Cd Player i also use Yter, and sometimes the coax out with AudioQuest Carbon
From Bluesound node i use Cardas, an older green one i dont remember the name.

My Equipment is
LoudSpeakers FocusAudio FS.788
Accuphase E-470
AudioAero Prima CD-Player
Bluesound Node
Argon Dac, for TV
So there is also room for future upgrades.

Flemming

[ehoove]

Originally Posted by ehoove

I build my own cables using mil spec Silver plated ofc copper with 2 leads and double silver plated copper shields. I built balanced cables using Neutrik Connectors for preamp to crossovers, and from my Sony SCD-XA5400ES and preamp. I built all unbalanced lifted ground cables using Neutrik RCA Connectors for the rest of the main rigs needs. I also use Cardas Silver Quad Eutectic Solder in my builds.

Speaker wire is Vampire SC-1108 biwire for the Bass and Mid panels, and 22ga solid core silver (x 3) braided for the ribbon tweeters in my Maggies. I run 12 ga. OFC magnet wire to my subs.
Regards,
Jim

UPDATE:
I now run Audio Magic Excaliber II interconnects from my sources, and Audio Magic Excaliber II Speaker wires to my Bass panels and my subs, and Vampire SC-1108 to the midrange and ribbons on the Maggies. My balanced interconnects from preamp to crossovers are hand built using Canare Star Quad, Neutrik XLR's, and Cardas Quad Eutectic Silver Solder. (26 ft. X 4 - 2 for main Crossover, and 2 for Sub crossover.
Regards,
Jim

[Catcher10]

Other:
Morrow Audio Grand Reference on Phono Cable and I/C's and Belden5000 10AWG for speaker cables built by BlueJeans in Seattle.

[EfeTe]

I used to maintain certain "uniformity" as in not all but mostly The Chord Company.

However in recent weeks I've been toying with cables and it'd become almost totally heterogeneous:

-Speaker cable: DIY bi-wiring with WBT connectors
-2 of the powercords are: also DIY with German Lapp Kabel Oelflex and Furutech connectors
-Another powercord: Element Cable Red Storm
-USB, Optical and dig. coaxial cables: The Chord Company
-Digital coax input 2: Signal Cable Silver Resolution

Playing with cables is fun innit

[jororupp]

I'm using Kimber cables for any connection.

[thesaint519]

Originally Posted by thesaint519

Transparent Reference XL MM2 & Reference ICs and Speaker cabling - MM1. Looking to upgrade to MM2, then XL.

Upgraded to all Transparent XL Cabling. Glad I did. Revelatory.

[Eisener Bart]

Power cables.

I am using 2 "brands".

1) Sound-YP (Ukraine, Ternopil City)





2) self-made cables. It's military soviet copper bus, polished by hand with german noe expensive connectors - Mennekes (black) and Kopff (brown).

[tom_hankins]

I think I have reached a point where I'm done with cables.
I use a Kubala/sosna Emotion Balanced (xlr) phono cable
Audioquest Skys from CDP and phonostage to preamp.
Audioquest Colorados from preamp to amps and subwoofers
Audioquest Mont Blanc speaker cables w/Kubala-sosna Elation! jumpers
Powercords are all from signal cable but one, Its a JPS red wave and used on the preamp.
Entire system uses xlr cables

[slayers]

mono price but i had millions of dollars id consider kimber...

[Rod#S]

Since my initial post I've started switching over to Siltech. I have a Royal Signature Golden Ridge II, 2 Royal Signature Ruby Hill IIs and a pair of Classic Anniversary 330i's. All cables are equipped with Furutech's top line connectors, the carbon & rhodium versions. One of my Ruby Hill's has the newest NCF variants.