#1
|
|||
|
|||
HDMI setting on JVC projector
Hi,
I am 2-ch guy, so I will have to ask this simple question. On Setup menu of my JVC projector, there are 3 options of HDMI Setting. Standard, Enhanced, Super White. From manual and from my guts, it should be at Standard. But the installer Insisted on Enhanced. And that I think deep black suffers from installer setting. Any idea? Thank you Toga |
#2
|
||||
|
||||
Depends on the player. I remember on the PS3, if you set both the player and display to enhanced, it worked better to pass BTB and WTW.
|
#3
|
|||
|
|||
Yes, in the manual say so too.
Enhanced for computer. Standard for video. I am playing video. The difference in in black to white dynamic range. Toga |
#4
|
||||
|
||||
Which projector do you have? My JVC options are Standard, Enhanced and Auto. I set mine to Auto. Picture mode to THX.
__________________
Trevor's Home Theatre: McIntosh MX121, McIntosh MC601, McIntosh MC207, McIntosh MLD7020, OPPO BDP95, JVC DLA950, Stewert Screen Studio Tek 130G3, B&W 802D2, B&W HTM2D2, B&W DS8, Klipsch KL 525, Velodyne DD15, WireWorld & IsoTek Cables |
#5
|
|||
|
|||
Mine is RS56/X75
|
#6
|
||||
|
||||
HDMI represents video signals by the digital value range of 0 - 255. Fundamentally, value 0 is black, value 255 is white, and the values between are levels of gray. The actual range of video for each type of signal source is:
0 – 255 = Video range for PC graphic signals (Enhanced setting) 16 – 235 = Video range for standard video signals (Standard setting) 16 – 255 = Video range for Super White video sources (Super White setting) Although video from a PC utilizes the entire 0 – 255 range, typical video sources use level 16 as the base level for black and level 235 as the peak level for 100% white. Super White video sources also use level 16 for black but use level 255 for peak white. If you run a normal source with the pj set for enhanced, you have to increase the black level a bunch or you get crushed blacks. A calibration disk is your friend here. So you need to check your player's setup Manual. Also with JVC projectors, at least my RS-50 and others i've calibrated, this is a global setting that will not save with any of the Picture Modes. Tom
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v Last edited by W9TR; 07-27-2013 at 11:59 AM. |
#7
|
||||
|
||||
Great info Tom. Clearly explained!
Hg
__________________
MacBook Air, Oppo BDP95, B&O Beogram 3404, Devialet D-Premier, Wilson Audio Sasha |
#8
|
||||
|
||||
Thanks! I think sometimes the terminology gets in the way of setting up our gear correctly.
Tom
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v |
|
|
Audio Aficionado Sponsors | |