|
McIntosh Audio A Tradition of Excellence |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Suggested output level for the MCD600
Braintrust,
In an ongoing effort to tweak my two channel setup, curious as to thoughts surrounding suggested output level for my MCD600 that is connected via XLR/balanced cables to a MA9000 integrated. Currently I have the MCD600's output level set to 75 - not sure if this is too/low, or right where it should be. Any thoughts or feedback would be appreciated. Thanks. Craig
__________________
Home Theater: McIntosh MX122, McIntosh MC207, McIntosh MPC1500, Oppo UDP-203, Sony VPL-VW715ES Projector, 106" Elite Screens Special Edition DarkStar screen, SVS Ultra Towers, SVS Ultra Center & Surround, and Duel SVS SB3000 subs, Audioquest RedRiver XLR, Audioquest Carbon HDMI, Audioquest NRG and Storm power cables, and Audioquest Ri1404 speaker cable with WBT-0645 banana plugs. Home Office: McIntosh RS200 Two Channel Listing Area: McIntosh MA9000, MEN220, MT-5, MCD600, MPC1500, and XR100s. Apple Airport Express via TosLink (streaming Apple Music). McIntosh interconnects/speaker cable, Shunyata Delta NR and XC power cables, Furutech GXT-D NCR AC Receptacle/Wall Plate/Outlet Cover. |
#2
|
||||
|
||||
Just bumping this to see if anyone has any thoughts or suggestions on the below.
Thanks. Quote:
__________________
Home Theater: McIntosh MX122, McIntosh MC207, McIntosh MPC1500, Oppo UDP-203, Sony VPL-VW715ES Projector, 106" Elite Screens Special Edition DarkStar screen, SVS Ultra Towers, SVS Ultra Center & Surround, and Duel SVS SB3000 subs, Audioquest RedRiver XLR, Audioquest Carbon HDMI, Audioquest NRG and Storm power cables, and Audioquest Ri1404 speaker cable with WBT-0645 banana plugs. Home Office: McIntosh RS200 Two Channel Listing Area: McIntosh MA9000, MEN220, MT-5, MCD600, MPC1500, and XR100s. Apple Airport Express via TosLink (streaming Apple Music). McIntosh interconnects/speaker cable, Shunyata Delta NR and XC power cables, Furutech GXT-D NCR AC Receptacle/Wall Plate/Outlet Cover. |
#3
|
||||
|
||||
I believe the output level is there in case the MCD was hooked up directly to an amp (no preamp). That could be used as a ‘volume’ control. If you have a preamp I see no harm with output set to 100% (but, if attached to a preamp with output cables that may override the ability to use the output level).
__________________
“Life is what happens to you while you’re busy making other plans” |
#4
|
||||
|
||||
It shouldn't matter if you're using the fixed outputs.
__________________
Joe Great Room: 2 Channel System Amplifier: McIntosh MC312 Preamp: McIntosh C22 Mk V (Gold Lion Tubes) DAC/CD/SACD: McIntosh MCD12000 Streaming Source: Aurender N10; UpTone Audio EtherREGEN Switch; AfterDark Project Clayx Giesemann OCXO 10MHz Reference Queen Master Clock w/ Black Modernize LPS x 2 Giesemann OCXO 10M Edition Speakers: Canton Reference 3K Power: 2x Dedicated 20 Amp Breakers + Whole House Surge Protection Power Outlets: PS Audio Power Ports Power Resonators: ADD-Powr Sorcer x4 (at service panel); ADD-Powr Wizard; ADD-Powr eau2; ADD-Powr Symphony (in network closet) Power Distribution: Shunyata Denali 6000/S v2 Power Cables: Shunyata Delta v2 XC (Denali v2 to dedicated 20A Outlet); Shunyata Venom NR v10 (Amp to Denali v2); Shunyata Delta v2 NR (Preamp to Denali v2); Shunyata Alpha v2 NR (DAC to Denali v2); Shunyata Venom NR v12 (Wizard to dedicated 20A Outlet); Shunyata Venom V14 Digital (Streamer and Master Clock LPS to Denali v2) Speaker Cables: Shunyata Sigma v1; Shunyata Sigma v1 Jumpers Audio Cables: Wireworld Silver Eclipse 8 XLR (Preamp to Amp); Wireworld Gold Eclipse 8 XLR (DAC Tube and Solid State Outputs to Preamp); Shunyata Sigma USB (Streamer to DAC); Shunyata Sigma v2 AES/EBU (Streamer to DAC); Shunyata Venom Ethernet (Wall Wart to EtherREGEN); Shunyata Sigma Ethernet (EtherREGEN to Streamer); Wireworld Platinum Starlight 8 75-Ohm BNC (AfterDark Queen Master Clock to EtherREGEN); Wireworld Platinum Starlight 7 S/PDIF (Streamer to DAC) Isolation: Stillpoints Ultra SS (Under Speakers); Stillpoints Ultra Mini's (Under Preamp and DAC); HRS E1 Isolation Platform w/G7 Feet and G-Links (Under Amp and Master Clock/LPS); HRS E1 Isolation Platform w/G7 Feet (Under Streamer); Shunyata DarkField Suspension System and DarkField Mini Elevators (Under Speaker Cables); IsoAcoustics Iso-Pucks (Under EtherREGEN) Noise Reduction: HRS DPX-14545 Damping Plate (On Amp and Preamp); HRS DPII-14545 Damping Plate (On DAC) Grounding: Shunyata Alpha v3 CGC/SGC Ground Cable (DAC to Denali v2); Shunyata Delta v2 CGC/SGC Ground Cable (EtherREGEN to Denali v2) Rack: Quadraspire SVT Sun Room Wireless Speaker: McIntosh RS200 Power Resonator: ADD-Powr Symphony Pro Power Distribution: Shunyata Venom PS8 w/ Venom Defender Power Cables: Shunyata Delta NR (Venom PS8 to Wall Outlet); Wireworld Silver Electra 7 (RS200 to Venom PS8) Isolation: IsoAcoustics Iso-Pucks Rack: Pangea Audio Vulcan |
#5
|
||||
|
||||
Ah yes, of course...I was inadvertently using the variable outputs. Thanks!
__________________
Home Theater: McIntosh MX122, McIntosh MC207, McIntosh MPC1500, Oppo UDP-203, Sony VPL-VW715ES Projector, 106" Elite Screens Special Edition DarkStar screen, SVS Ultra Towers, SVS Ultra Center & Surround, and Duel SVS SB3000 subs, Audioquest RedRiver XLR, Audioquest Carbon HDMI, Audioquest NRG and Storm power cables, and Audioquest Ri1404 speaker cable with WBT-0645 banana plugs. Home Office: McIntosh RS200 Two Channel Listing Area: McIntosh MA9000, MEN220, MT-5, MCD600, MPC1500, and XR100s. Apple Airport Express via TosLink (streaming Apple Music). McIntosh interconnects/speaker cable, Shunyata Delta NR and XC power cables, Furutech GXT-D NCR AC Receptacle/Wall Plate/Outlet Cover. |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |