AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Magnepan

Magnepan Full-range ribbon and planar speakers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 12-26-2011, 08:08 PM
audiot servant's Avatar
audiot servant audiot servant is offline
Senior Member
 
Join Date: May 2011
Location: Lake Macquarie (just north of Sydney) Australia
Posts: 940
Default

Quote:
Originally Posted by dpod4 View Post
Here is a vote for the duelund cast resistors. I have been using a duelund cast .6 resistor in my 3.7 tweeters (better by a wide margin to stock resistor partly because stock was dampening down too far). For jumper cables I bought the cardas GR jumpers for midrange and tweeter...better than stock - Smoothed things out almost like a resistor. But combination I am running now and like a lot is duelund .6 cast resistor (from partsxpress) in tweeters with custom Maggie jumpers from empirical design in the midrange when running CJ 350 amp (when running VAC tube amp may replace the resistor with jumper after Maggies break in).

Below is the note to me from emp designs owner - his obsessive attention to detail sold me. Super good guy to deal with. Jumpers align with fast open Maggie sound.

"Darrin,

I have indeed fabricated custom Magnepan jumpers for several customers. In order to avoid frequency-dependent phase shift due to skin depth, the jumpers are simply made of mil-spec PTFE Telfon insulated silver-plated copper wire, with the exposed ends doubled-back and tinned with silver solder.

Fortunately the Magnepan set-screws are long enough to compress the tinned ends against the opposite wall of the sockets when tightened snugly.

I recommend 18 gauge wire for the midrange jumper, and 22 gauge wire for the tweeter jumper, which insures that all phase shift is outside of each driver's effective passband.

Cost is $10 for each 4" jumper; i.e. $40 for a set of four jumpers, plus $6 for Priority Mail shipping.

Thanks for your interest in Empirical Design; just let me know if you'd like to order a set of the jumpers.

Sincerely,

Karl"
Darrin - put in an order with Karl for a set of Empirical Design jumpers for the 3.7s.

I got a confirmation email on the 25th of December from Karl saying a set of his musical wires had been dispatched and were winging their way to me... sure he must have been wearing a big red suit at the time... what a fantastic joy he has been to deal with... many thanks for the recommendation... the Maggies look forward to getting their new jumpers - they are a christmas present just for them because they have been so very good this year.

Graham

Last edited by audiot servant; 12-26-2011 at 08:12 PM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 04:27 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video