finally figured out my new system

[Chrisandalex1]

So here is the final system. I can't wait to get it all put together and listen to some great tunes.

Big thanks to Ivan, Emile @ Audio by E, Dave at ZenWave, Albert Von Schweikert, Klaus Bunge at Odyssey Audio and everyone else who help me put it all together.

I will post some pics when we get it all set up. Should be around the middle of February.

Von Schweikert -
VR4jr's 2015 upgrades
LCR-15 - Albert is doing his first ever upgrade to these for me
TS-150 rears
V-12 Shockwave Sub

Bryston-
SP3 Preamp

Odyssey Audio -
3 Kismet Reference Monoblocks
1 Kismet Reference Stereo

Audio By E -
SilenZio Media Sever
6TB NAS

ZenWave Audio -
D4 Interconnects
Furutech N1-4 HDMI and WW Platinum HDMI
SMC and SMSG Speaker Cables
Custom Surge X SEQ Power Conditioner - Same as Albert used at RMAF this year

Also going to have GIK Acoustics visit my home and do their magic.

[Still-One]

Sounds like a fine plan. Looking forward to some photos when you get it all together.

[-E-]

You are going to have a blast (figuratively and literally) once we get you fully implemented!

[4Play]

Looking forward to some pics. Someone pass the popcorn.

[ferfo]

looking good!

[FlyhiG]

Looks like a great system on your horizon. Like to know what the upgrades are on the VSA speakers. I have the VR4jr's and love them. Happy listening and looking forward to pictures as well.

[Chrisandalex1]

Originally Posted by FlyhiG

Looks like a great system on your horizon. Like to know what the upgrades are on the VSA speakers. I have the VR4jr's and love them. Happy listening and looking forward to pictures as well.

VR-4 JR to VR-4 JR Mk3 “EuroMod” - at $2,500 we rebuild the entire speaker system and install all new parts – everything except for the outside of the cabinet. All speakers, crossovers, and internal damping is changed to our latest spec. See attached Mk3 EuroMod info sheet for the wealth of information on this exciting new upgrade!

VR-4 JR Mk3
“Euro- Model”

Due to the demand for extreme quality combined with small size to fit the newer life style, the VR-4 JR Mk3 Anniversary has been designed on the small platform previously called the “JR” model. However, the Anniversary Model is highly upgraded and is hand-built at our California factory. Using premium Scanspeak drivers made in Denmark, the sound quality will exceed your expectations for speakers selling in the $25,000 price category. Our Triple-Wall cabinet design eliminates the colorations found in MDF cabinets, with an internal layer of damping stones absorbing the vibration.

With dimensions similar to a mini-monitor mounted on a stand, the new VR-4 Anniversary Model can be used in rooms as small as 8x10 feet and will reproduce bass power below 30Hz. Transparency exceeds any planar available due to the European-designed Drive Units and our famous VSA crossovers!

Specifications

• Size: 8.5” W x 38” H x 20” D; Weight: 100lbs/ea., 300 lbs/pr in wood crates.
• Impedance: 4 ohms; Sensitivity: 90dB; Power Handling: 200 watts music.
• Frequency Range: 25 Hz to 25 kHz, +/- 3dB.
• Drive Units: 2-7” Super-Duty composite paper/carbon fiber woofers, 1-7” composite-cone mid, 1” silk dome tweeter with rear chamber. All drivers built by Scanspeak and have Low Distortion Motor systems (Pat. Pend.)
• Ambience Retrieval System: 1” rear-firing silk dome tweeter w/Wave Guide.
• Finishes: Steinway Piano Black Hi-Gloss (Signature) or African Hazelwood.
• Signature version features hand-wired premium crossover with VSA wire.
• $7,500/pr for Signature version with upgraded Premium Crossover (either African Hazelwood or Steinway Piano Black Hi-Gloss).
• Older VR-4 JR models can be upgraded to the Mk3 Anniversary level for $2,500 and includes all ScanSpeak drivers, VSA premium crossovers and wiring, and the Shatki stone vibration dampers installed internally. Completion requires two weeks and will have a full 10-Year Extended Warranty, with a Satisfaction Guaranty.