#1
|
||||
|
||||
VPI Periphery ring feedback
Was wondering if some of you with the periphery ring could comment on the performance of your VPI table/vinyl and what it did in your system. The ring is about the only accessory I haven’t tried with my Classic Signature. I’m using the Stillpoints clamp from Ivan with great success along with the SDS but was thinking of picking up the ring. Major improvements or not necessary? FWIW I don’t have hardly if any warped vinyl although I do have a few with typical edge warp that don’t cause major issues.
- Buck
__________________
Library: Speakers: Avalon Acoustics Isis, Subwoofers: (2) REL Acoustics 212SE Amplification: D’agostino Momentum preamplifier, D’agostino S250 stereo amplifier Digital: dCS Rossini CD/SACD transport, dCS Rossini DAC/streamer/master clock. Analog: Brinkmann Taurus table, Lyra Etna Lambda, Audio Research Ref. Phono 3 |
#2
|
|||
|
|||
Buck I have the ring on mine and to be honest it’s mostly for the good looks!!!
|
#3
|
||||
|
||||
Can you tell a noticeable difference on a particular record with it on or off?
__________________
Library: Speakers: Avalon Acoustics Isis, Subwoofers: (2) REL Acoustics 212SE Amplification: D’agostino Momentum preamplifier, D’agostino S250 stereo amplifier Digital: dCS Rossini CD/SACD transport, dCS Rossini DAC/streamer/master clock. Analog: Brinkmann Taurus table, Lyra Etna Lambda, Audio Research Ref. Phono 3 |
#4
|
||||
|
||||
Buck... I find the periphery ring adds more than good looks. It provides more outer mass, they are surprisingly heavy.
Like you, all my vinyl is in great shape. That said, occasionally the edge may have a slight bend aka warp. The ring just makes it consistently easy to cue up a new album. I use them on both of my ClearAudio tables too.
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#5
|
||||
|
||||
I have one. Many of my records are 50+ years old so not flat at all. It helps a lot.
The only problem I have with it is two extra operations: to remove it then to put it back, which doubles the already lengthy manual process. |
#6
|
|||
|
|||
I hardly ever place the periphery ring on a record due to the tremendous inconvenience and the fact that I have very few warped records. When I did use it years ago, I could sometimes, but not always, hear a slight improvement in the sound (less tizzy on high end) presumably caused by a reduction of vibrations resulting from the stylus/vinyl interface. Now, I use the Stillpoints LP1 center weight and find that it damps the vinyl nicely. Seems to me you might be better served by putting your $ towards other vinyl needs.
__________________
Wilson Alexia V, ARC Ref 160M MkII,Ref 40,Ref Phono2SE, Shunyata Triton3, Typhon, Sigma PCs, ICs & SCs, Spectral SDR4000SV (w MIT IC), Belcanto PL1, Oppo 205, Marantz 2270 (tuner only):AudioDesk and VPI record cleaners, Furutech Demag & Destat; Stillpoint Apertures, TechDas AF 3S Premium with SAT CF9 and Kuzma 4pt 9" arms, Lyra Atlas Lambda SL, Dynavector XV1-t stereo and XV1-s mono carts, Miyajima mono, Shure V15VxMR, Last edited by jpgr4blu; 10-24-2018 at 12:17 AM. |
#7
|
||||
|
||||
Me Too! I just leave it on the platter and never put it over the record. Looks good though!
__________________
.... I have a record player and a cd player and some other stuff that sounds pretty good. MAIN SYSTEM: . . . Audio Physic Caldera III Loudspeakers, Spectral DMC 30SL Preamp, Spectral DMA 250 Amp, Spectral/MIT interconnects and speaker cable, Basis Debut V Vacuum turntable, Walker Precision Speed Controller, Graham tonearm, [B]Koetsu Rosewood or Grado Statement 1 Cartridges, PASS - X-ono Phono Stage, Esoteric K03 CD/SACD Player, Lexicon RT-20 Universal Player, Exact Power EP-15A & SP-15A power regeneration and conditioning devices. Symposium Acoustics Svelte pads & RollerBlock Jr's under speakers. ASC Tube Traps, Arcici Suspense Rack System, OPPO and Cambridge Streaming Devices. DOWNSTAIRS SYSTEM: . . . Sonus Faber Guarneri Memento Speakers, JL Audio F112 Sub, McIntosh MA7000 Integrated Amp, McIntosh MVP871 Universal Disc Player, OPPO BDP-105 Blu-Ray Player, VPI Scoutmaster with periphery ring clamp, VPI SDS Motor Drive, Koetsu Pro IV, or Clearaudio Discovery Cartridges, Mark Levinson No. 25s phono stage, Wadia 170i Transport with a Meridian Bitstream 203 DAC, VPI HW-17 Pro Record Cleaning Machine, Five Richard Gray RGPC 400 devices scattered around the two systems, Arcici Suspense Rack System, Discovery Essence and Essential Cables, 14,000 ± LPs . |
#8
|
||||
|
||||
I leave mine on my Aries and use it only for the warped LPs which I have less than 2% in my collection. The rotational mass is a nice bonus.
__________________
“Life is what happens to you while you’re busy making other plans” |
#9
|
|||
|
|||
Buck, mine has been on my Aries III ever since I upgraded to the 'super platter' years ago. With the majority of my pressings it stays beneath but for the handful of noticeably warped it's put to use. I believe it aids in regions of deep bass where groove modulation (control) can be an issue.
|
|
|
Audio Aficionado Sponsors | |