#11
|
|||
|
|||
Mc Pre amp needs stereo trigger. So.....I will have to figure it out on the pass side. Should be no biggie.
|
#12
|
||||
|
||||
Tip = +12v
Ring = amp lights Sleeve = ground
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#13
|
|||
|
|||
|
#14
|
|||
|
|||
12 volt trigger
From my measurements on a Pass X250.5...... any voltage between 7vdc and 15vdc at about 5ma was good to go for the remote trigger.
The front panel switch on the Pass amp had to be selected for "stand-by" for the remote trigger to function. Cyclotronguy |
#15
|
|||
|
|||
To turn on my Mc601 amps I got a radioshack 3 conductor 1/8" (3.5MM) phone jack, and wired ground to ground and plus to tip of the stereo jack. You need to use a stereo jack if you want the meters to illuminate. Then connect the plus side to the +12 and ground to the ground of the Pass XP-20 pre amp it has a connector on the back that looks like speaker connectors. then connect the Mac amps with 1/8 " stereo cables. The remote has a ext amp on as the XP - 20 is on all the time. I used this set up so if I use the Mac C220 pre I just unplug the cable and plug it into the mac.
__________________
Stuff - Pair of MC601 amps, Pass XP-20 and C220 pre, Benchmark Dac, Oppo 95, Magnapan 1.7,Rythmik sub.various other stuff parasound P7 pre, home built pass diy amp, Thiel and diy speakers. |
#16
|
|||
|
|||
here's a pic of what I have used in the past which should work for you.
The stereo minijack goes in preamp trigger. The other end is cut with one lead on one pass amp trigger +ve terminal and one on -ve terminal. The second cord is simple lamp cord that I've put crudely crimped spades on. One end is connected to the same two terminals of the 1st pass amp and the other end is connected with like terminals on the second pass amp.[IMG][/IMG] |
#17
|
|||
|
|||
Thanks! I futzed around with it today, but had no luck. I cut the end off a STEREO MINI plug. One cable had copper with some red thread, the other side had copper with a white strip in the middle. I put the red threat on the positive and the other thread (with the white strip) on the black. No luck. I will take pictures tomorrow and send. I wasn't sure if I should strip away the white strip. I'm thinking that's the ground.
|
|
|
Audio Aficionado Sponsors | |