AudioAficionado.org  

Go Back   AudioAficionado.org > Audio & Video > Acoustical Treatments

Acoustical Treatments Because the room matters

Reply
 
Thread Tools Display Modes
  #21  
Old 10-26-2019, 12:27 PM
rnrmf1971 rnrmf1971 is online now
Senior Member


 
Join Date: Jul 2009
Location: orlando
Posts: 979
Default

Quote:
Originally Posted by MGW View Post
Thanks, rnrmf1971, presumably your Harbeths are also mounted on stands?
Yes, my Harbeth speakers came with Skylan stands which have a platform the entire speaker sits on. I decided to try Orea footers between the platform and my Harbeth 40.2 speakers.
Although going back and forth comparing wasn't convenient, I did it a few times and I think the Oreas made an improvement.
It makes me interested in the sound of the fully open design of the Ton Trager stands.
__________________
Christian

STUFF:Mark Levinson No.52 pre-amp, Bricasti M28 amplifiers, Oppo BDP-205, Pioneer CT-43, Wireworld Platinum Eclipse IC's and speaker cables, Acrolink, Siltech, and Furutech PCs, Shunyata Triton V3 +Typhon w/ Sigma HC power cable, Sony SS-AR1 Speakers
Reply With Quote
  #22  
Old 10-26-2019, 12:54 PM
MGW MGW is offline
Junior Member
 
Join Date: Oct 2019
Posts: 7
Default

My Sonus Faber's are on heavy SF stands and I am interested in trying the Gaia (IIIs) in place of the spikes at the bar if the stands.

Had anyone tried this stand mount-Gaia configuration? I cannot really see how it is so much different to simply replacing the spikes on floor standees with the Gaia.

Something between the speakers and stands woukd not work overly well for thus setup or our domestic arrangements

I have been trying to get information from Isoacoustics but messages through the their contact page seem not to elicit any form of response.
Reply With Quote
  #23  
Old 10-26-2019, 01:12 PM
MGW MGW is offline
Junior Member
 
Join Date: Oct 2019
Posts: 7
Default

Quote:
Originally Posted by Puma Cat View Post
Mike,

Regarding speaker decoupling and footers, consider all Herbie's Audio Labs "Fat Dot" series of dBNeutralizer material for placement between speaker and stand and Herbie's Decoupling Gliders for use as a footer at the bottom of the stand. I use the Decoupling Gliders under my big Dyns on carprt to very good effect. They are also very inexpensive compared to other footers.

Square Fat Dot made of dB Neutralizer material: "This firm yet loosely crosslinked material is formulated specifically for blocking mechanical soundwave energies. Wide footprint gets a good grip and provides excellent lateral stability. Each Big Fat Dot supports and isolates from five to more than 200 pounds (90kg)."


Threaded Stud Gliders. These have a Teflon base and make it easy to slide the speaker around on carpets and rugs.
"Nifty glider replaces threaded spikes or cones for loudspeaker or rack isolation and mobility with superb lateral stability. (With an efficient decoupling approach, spikes are not really needed at all.) Fiberglass reinforced dBNeutralizer-filled vinyl base with smooth polymer bottom handles virtually any weight load on bare or carpeted floor. With jam nut to lock-in height adjustment. (Superb also for use as turntable or amplifier feet.)"


FWIW, these decouplers are recommnded for speaker decoupling and footers by some setup professionals that use the Masters method.
Thanks PC.
These operate in a fundamentally different node to the Gaia. These, while I am sure that they are much better than sorbothane, seem to fall within that general category.
The Gaia, well the website is quite an interesting read ... This, combined with the reviews, is what set me looking in that direction.
Reply With Quote
  #24  
Old 11-12-2019, 05:14 PM
Formerly YB-2's Avatar
Formerly YB-2 Formerly YB-2 is online now
Retired

 
Join Date: Jan 2010
Location: NJ Shore
Posts: 5,594
Default

Just ordered four (4) of the small Dots & a pair (2) of the large Dots to place between my Canton Ref 9K monitors and the stand tops. The stands came with four (4) small rubber dots (one per corner), but I'll replace with the small Dots at each front corner and center a large Dot at the rear. I use IsoPucks under the corners of my TT and am pleased with them.
__________________
Glenn...
Audeze LCD-3 Canton Ref 9K Clearaudio SM Pro Denon DP-80 w/Lyra Kleos, Ortofon Cdza Blk & K-b, AT33R & AT150Ti Kenwood L-07M mono-blocks Mark Levinson No. 383 Oppo 203 Parasound JC3 jr PS Audio Ultimate Outlet Sony ST-J75 Stax UA-7/CF SurgeX XR-315 Woo WA6 Gen 1 WW Eclipse 8/7 Pt, Au, Ag, Starlight & Nano
Reply With Quote
  #25  
Old 11-12-2019, 05:27 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
conrad-johnson, baby!


 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 8,570
Default

Quote:
Originally Posted by MGW View Post
Thanks PC.
These operate in a fundamentally different node to the Gaia. These, while I am sure that they are much better than sorbothane, seem to fall within that general category.
The Gaia, well the website is quite an interesting read ... This, combined with the reviews, is what set me looking in that direction.
No, the Herbie's Threaded Stud Gliders do not function the same manner as sorbothane.
__________________
conrad-johnson CT-5 and LP70S, Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion w/ EAR324, Oppo BD-83SE, Sonore OpticalModule with Uptone Audio LPS-1.2 power supply, SOtM UltraNeo with Keces P3 power supply, Shunyata Alpha USB cable, Schiit Gungnir Multibit Gen 5 USB DAC, Schiit Loki DSD DAC, Mac Mini/Roon, Dynaudio Contour S3.4 with Esotar 2 tweeters, REL R-305, Audioquest Colombia and Colorado ICs, Shunyata Venom speaker cables, Shunyata Zitron Cobra and Black Mamba CX and Venom 3 power cords, Shunyata Triton, Synergistics Research HFT acoustical tuning devices
Reply With Quote
  #26  
Old 11-12-2019, 05:28 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
conrad-johnson, baby!


 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 8,570
Default

Quote:
Originally Posted by Formerly YB-2 View Post
Just ordered four (4) of the small Dots & a pair (2) of the large Dots to place between my Canton Ref 9K monitors and the stand tops. The stands came with four (4) small rubber dots (one per corner), but I'll replace with the small Dots at each front corner and center a large Dot at the rear. I use IsoPucks under the corners of my TT and am pleased with them.
Hi Glenn,
Are you referring to the Herbie's small and large Dots?

Cheers and thanks,
Stephen
__________________
conrad-johnson CT-5 and LP70S, Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion w/ EAR324, Oppo BD-83SE, Sonore OpticalModule with Uptone Audio LPS-1.2 power supply, SOtM UltraNeo with Keces P3 power supply, Shunyata Alpha USB cable, Schiit Gungnir Multibit Gen 5 USB DAC, Schiit Loki DSD DAC, Mac Mini/Roon, Dynaudio Contour S3.4 with Esotar 2 tweeters, REL R-305, Audioquest Colombia and Colorado ICs, Shunyata Venom speaker cables, Shunyata Zitron Cobra and Black Mamba CX and Venom 3 power cords, Shunyata Triton, Synergistics Research HFT acoustical tuning devices
Reply With Quote
  #27  
Old 11-12-2019, 06:28 PM
MGW MGW is offline
Junior Member
 
Join Date: Oct 2019
Posts: 7
Default

Quote:
Originally Posted by Puma Cat View Post
No, the Herbie's Threaded Stud Gliders do not function the same manner as sorbothane.
... what I was getting at was the difference between sorbothane and other items, including the threaded stud gliders, which have no preferential plane, and the Gaia, which do have a preferential plane for movement and/or vibration. This does mean that the mode of operation is fundamentally different.
It is worth reading the Isoacoustics website on the Gaia, whether the product interests you or not the science behind the Gaia is quite interesting and the approach to the engineering of the product is certainly innovative.
Reply With Quote
  #28  
Old 11-14-2019, 01:10 PM
Formerly YB-2's Avatar
Formerly YB-2 Formerly YB-2 is online now
Retired

 
Join Date: Jan 2010
Location: NJ Shore
Posts: 5,594
Default

Quote:
Originally Posted by Puma Cat View Post
Hi Glenn,
Are you referring to the Herbie's small and large Dots?
Cheers and thanks,
Stephen
Stephen - Yes. No adhesive. Install should be very simple. Should arrive on Friday. I'm not sure when I will have the opportunity to do some serious listening, but will report back once I do. I'm waiting a warranty part delivery and have to get that installed to get my system's 'baseline SQ' back to normal before I can make a meaningful comparison. Holiday travel starts next week for me, so may be after the New Year.
__________________
Glenn...
Audeze LCD-3 Canton Ref 9K Clearaudio SM Pro Denon DP-80 w/Lyra Kleos, Ortofon Cdza Blk & K-b, AT33R & AT150Ti Kenwood L-07M mono-blocks Mark Levinson No. 383 Oppo 203 Parasound JC3 jr PS Audio Ultimate Outlet Sony ST-J75 Stax UA-7/CF SurgeX XR-315 Woo WA6 Gen 1 WW Eclipse 8/7 Pt, Au, Ag, Starlight & Nano

Last edited by Formerly YB-2; 11-14-2019 at 01:17 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 01:21 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
ęCopyright 2009-2019 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Acoustic Sciences Corportation
Acoustic Sciences Corportation
Legend Audio & Video
Legend Audio & Video
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Accuphase
Accuphase