AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Shindo Labs

Shindo Labs Sound Create Producer

Reply
 
Thread Tools Display Modes
  #1  
Old 10-22-2017, 03:49 PM
maril555 maril555 is offline
Member
 
Join Date: Nov 2015
Location: Philadelphia area
Posts: 57
Default Shindo XLR-RCA IC pinout

I need longer IC b/w my Vosne Romanee preamp and power amps, and I'm going to make my own to try, since I don't have an option of moving VR close to the amps in order to use my current 4 ft. Shindo IC, because of the physical layout of the room.
Can somebody help me with the XLR pinout on Shindo cables, please?
My understanding is Pin 2 (hot) is connected to RCA center pin and Pins 1 and 3 connected to RCA barrel (ground).
It can either be accomplished with 3 conductors wire with Pin 1 - and 3 of the XLR connected together to RCA ground in the RCA connector, or with 2 conductors wire, where only Pin 1 is connected to RCA ground and Pin 1 is connected to Pin 3 in the XLR connector internally.
I just want to make sure I understand exactly how Shindo does it.
Appreciate your help.
Reply With Quote
  #2  
Old 10-22-2017, 04:52 PM
vintage_tube's Avatar
vintage_tube vintage_tube is offline
BeurselfEvery1elseistaken



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,518
Default

https://yourhost.com/balanced-vs-unb...ca-connectors/



Best sir,

Bob
__________________
Amps: Dan D'Agostino Progression Monos on 20A dedicated breakers.
Preamp: Dan D'Agostino Progression Preamp.
Digital Source: dCS Paganini 4 stack (Transport/DAC/Clock/Upsampler).
Analogue Preamp: VAC Renaissance SE Phono stage with XLR Output Option & with Nordost Tyr 2 P/C and Tyr 2 XLR's.
Analogue Sources: SME 20/2 w/SME V arm & Nordost Valhalla TA cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote.
Vibration Control: TT on HRS M3X 1921 shelf, Stillpoint Ultra SS under dCS Transport, Stillpoint Ultra-Mini's under dCS 3 Stack. HRS NA100's under Ansuz D8 Power Distribution Bar.
Speakers: Wilson Audio Alexia in Argento Silver/Black grills.
Power Cables: 3 each 2.5M Nordost Odin Supreme Reference on amps & preamp. Nordost Valhalla V1 on dCS Transport.
Power Distribution Bar: Ansuz Mainz Diamond 8(D8) fed by Ansuz Diamond Power Cable.
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2).
Speaker Cables: 3M Nordost Odin Supreme Reference with 4 Nordost Sort Lifts.
Signal Cables: Nordost Tyr 2 XLR's 2M on dCS Paganini and Mono amps. Nordost Valhalla 2's 110 ohm Digital AES/EBU on dCS internal connections and Crystal Cable Firewire 1394 cables on dCS.
Clock Cables: 3 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Headphones: Selling - 6M Cardas Clear HP cables. Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear: Mint late '60's/calibrated Heathkit TT-1A & current SOTA MaxiMatcher Power and Preamp tube test sets.
Reply With Quote
  #3  
Old 10-22-2017, 05:29 PM
maril555 maril555 is offline
Member
 
Join Date: Nov 2015
Location: Philadelphia area
Posts: 57
Default

Thank you,
That is helpful.
But, do you know which way Shindo is using?
I understand, Vosne Romanee has transformer coupled output
Reply With Quote
  #4  
Old 10-22-2017, 05:36 PM
vintage_tube's Avatar
vintage_tube vintage_tube is offline
BeurselfEvery1elseistaken



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,518
Default

Quote:
Originally Posted by maril555 View Post
Thank you,
That is helpful.
But, do you know which way Shindo is using?
I understand, Vosne Romanee has transformer coupled output
Monday, call Jonathan in NY and get it squared away (or send an email).

Tone Imports
Jonathan Halpern
New York
Tel. 646-425-7800
shindo.usa@mac.com
www.toneimports.com

Best Sir,

Bob
__________________
Amps: Dan D'Agostino Progression Monos on 20A dedicated breakers.
Preamp: Dan D'Agostino Progression Preamp.
Digital Source: dCS Paganini 4 stack (Transport/DAC/Clock/Upsampler).
Analogue Preamp: VAC Renaissance SE Phono stage with XLR Output Option & with Nordost Tyr 2 P/C and Tyr 2 XLR's.
Analogue Sources: SME 20/2 w/SME V arm & Nordost Valhalla TA cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote.
Vibration Control: TT on HRS M3X 1921 shelf, Stillpoint Ultra SS under dCS Transport, Stillpoint Ultra-Mini's under dCS 3 Stack. HRS NA100's under Ansuz D8 Power Distribution Bar.
Speakers: Wilson Audio Alexia in Argento Silver/Black grills.
Power Cables: 3 each 2.5M Nordost Odin Supreme Reference on amps & preamp. Nordost Valhalla V1 on dCS Transport.
Power Distribution Bar: Ansuz Mainz Diamond 8(D8) fed by Ansuz Diamond Power Cable.
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2).
Speaker Cables: 3M Nordost Odin Supreme Reference with 4 Nordost Sort Lifts.
Signal Cables: Nordost Tyr 2 XLR's 2M on dCS Paganini and Mono amps. Nordost Valhalla 2's 110 ohm Digital AES/EBU on dCS internal connections and Crystal Cable Firewire 1394 cables on dCS.
Clock Cables: 3 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Headphones: Selling - 6M Cardas Clear HP cables. Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear: Mint late '60's/calibrated Heathkit TT-1A & current SOTA MaxiMatcher Power and Preamp tube test sets.

Last edited by vintage_tube; 10-22-2017 at 05:38 PM.
Reply With Quote
  #5  
Old 10-12-2018, 08:53 PM
Balazs Balazs is offline
Junior Member
 
Join Date: Oct 2017
Posts: 2
Default

And, in which way did you make it?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 09:55 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
ęCopyright 2009-2018 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Fortress
Fortress
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Acoustic Sciences Corportation
Acoustic Sciences Corportation
Legend Audio & Video
Legend Audio & Video
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Accuphase
Accuphase