AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Tannoy Speakers

Tannoy Speakers Over 80 Years of Audio Invention

Reply
 
Thread Tools Display Modes
  #1  
Old 05-27-2014, 05:45 PM
GWNG8 GWNG8 is offline
Guest
 
Join Date: Nov 2011
Posts: 191
Default Crossover explanation

Can someone explain how the crossover adjustments are utilized. Do people even use them?
Reply With Quote
  #2  
Old 05-27-2014, 07:00 PM
jdandy's Avatar
jdandy jdandy is offline
Merry Christmas to all



 
Join Date: Apr 2009
Location: North Central Florida
Posts: 53,224
Default

GWNG8.......Can you be a bit more specific? What crossover are you asking about and what adjustments?
__________________
Dan



STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario
LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113
VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A
Reply With Quote
  #3  
Old 05-27-2014, 07:12 PM
GaryProtein's Avatar
GaryProtein GaryProtein is offline
Member
 
Join Date: Jan 2012
Location: NY
Posts: 5,393
Default

Do you mean an active crossover?
Reply With Quote
  #4  
Old 05-27-2014, 10:17 PM
NZ421291 NZ421291 is offline
Guest
 
Join Date: Dec 2009
Location: Auckland, New Zealand
Posts: 652
Default

I assume you mean the Loudspeaker System Adjustment panel on the front of the speakers.

I have my Tannoy Canterbury Cross-over adjustments set at Energy -1.5 which suits my listening room - the Roll Off is set at 'Level'. My contact within Tannoy tells me the 'Roll Off' adjustment is really designed to allow the speaker to cope with 78rpm recordings & should always be set to 'Level' if you are not playing them!

From the manual:

Each loudspeaker is fitted with two controls located on the front baffle beneath the detachable grille. These high current switch blocks
are labelled ROLL OFF and ENERGY. They can be used to compensate for the varied acoustic characteristics of listening rooms.
The controls should be adjusted with the amplifier tone controls in the 'flat' or uncompensated position. Each loudspeaker should be
adjusted individually. This is most easily done by rotating the amplifier balance control to select first one loudspeaker and then
the other.
The ENERGY control has five positions. It allows the output of the high frequency compression drive unit to be increased or decreased
from the linear or 'flat' position over a frequency band from approximately 1kHz to 20kHz.
The ROLL OFF control has five positions (+2, level, -2, -4 and -6dB per octave) and provides adjustment at extreme high frequencies
from 5kHz to 20kHz.
The ENERGY control has a shelving effect over the 1kHz to 20kHz frequency band whereas the roll off control increases or decreases
the slope of the extreme high frequency response hinging about 5kHz.
The flattest, most linear response from the loudspeaker will be obtained with both controls set at the LEVEL position, and this position
should be used for initial listening tests. If the overall high frequency sound quality seems too prominent the -1.5 or -3 positions for
the ENERGY control should be tried. If the sound appears subdued in the treble region +1.5 or +3 settings may be preferred. Once
the ENERGY control setting has been established the ROLL OFF control can be adjusted to reduce or slightly increase the extreme
high frequency content if necessary.
Remember the changes that can be made by moving either control from one position to another are subtle. They may not easily be
heard if the programme material has very little content in the frequency band under consideration. Choose a well balanced piece of
music with a full spectrum of sound. The correct setting will be found when the loudspeakers are no longer evident and only the musical
performance is heard.
The low frequency output of the loudspeaker in the range 25 to 100Hz may be adjusted by operating the two sliding port openings
on each side of the cabinet. Each port may be varied from fully open (full distributed port operation, both port slides in upper position)
to fully closed (infinite baffle or acoustic suspension operation, both port slides in downward position). When both ports are fully open
a very full rich bass response will be heard, when fully closed the bass response becomes more subdued. The correct setting is a matter
for personal preference and local acoustic conditions. With one port open and the other closed the bass response will be 'level' and
this position should be used for initial evaluation.

Last edited by NZ421291; 05-27-2014 at 10:19 PM.
Reply With Quote
  #5  
Old 05-29-2014, 03:31 PM
GWNG8 GWNG8 is offline
Guest
 
Join Date: Nov 2011
Posts: 191
Default

Yes I was referring to the changeable brass front panel. I just don't find the manual helpful and was wondering if others use it.
Reply With Quote
  #6  
Old 05-29-2014, 04:31 PM
DavidA DavidA is offline
Junior Member
 
Join Date: May 2011
Posts: 26
Default

I fooled around with them when I was breaking in my Kensington's, but soon returned them to level position. I always changed them with the amp turned off, but I think the manual said you could change them on the fly.
Reply With Quote
  #7  
Old 06-01-2014, 04:41 AM
NZ421291 NZ421291 is offline
Guest
 
Join Date: Dec 2009
Location: Auckland, New Zealand
Posts: 652
Default

My Canterburys are sited on the long wall in my lounge & level position was a little to forward, so changing to -1.5 (recommended by a Westminster Royal user at the Jeffs Place website to suit near field listening which I do) - and the advise was correct. I much prefer them set to -1.5. I also use the ST100B Super Tweeters set at 14Hz & 95db (as stated in the manual for the Canterbury) and this matched well with the main speakers.

Note that the difference in settings is subtle but noticeable over a long listening period ( I regularly listen in 2 hour blocks) and switched the level a number of times, but always came back to -1.5.

Just my opinion, and note that my speakers are the 1st Generation Canterbury 15's with the foam surrounds. I compared them to the 3rd Generation SE's and there was very little difference (the cabinets are identical) The SE had slightly tighter lower bass than my 15's, but with the Super Tweeters installed they improved the bass on my speakers.

Im in the process of writing a review of the ST100B Super Tweeters for this Forum, but unfortunately Ive had another major asthma attack which has knocked my down for the last week & I haven't done any critical listening for a while- Ive owned the Super Tweeters for just over 2 months- and I couldn't be without them!!

Last edited by NZ421291; 06-01-2014 at 05:09 AM. Reason: Jims Place is a Porn Site- should be Jeffs Place- Ill blame my asthma!
Reply With Quote
  #8  
Old 06-01-2014, 09:52 PM
Douger Douger is offline
Member
 
Join Date: Jun 2010
Posts: 60
Default

Nice explanation above, good luck and be safe with your asthma!
Reply With Quote
  #9  
Old 06-02-2014, 05:41 PM
mulveling mulveling is offline
Guest
 
Join Date: Jan 2013
Location: Atlanta, GA
Posts: 589
Default

I owned the Kensington SE before my current Canterbury SE, and have never liked any Rolloff setting other than Level; it's interesting to see Tannoy's explanation on that (i.e. Rolloff adjustments are not intended for hifi sources). I must admit that I'm running the Canterbury with +1.5 treble energy/shelving; the inner purist in me hates typing that, but it just sounds better in my room. With the Kensington, I ran all Level, and even that was a bit too bright without warm tubes to tame it (the Canterbury is the darker speaker). However, -1.5 also didn't work, as it killed the sound. I find the steps to be rather coarse.

The supertweeters shake things up. I've tried the ST200 with Kensington and ST100 with Canterbury. Using all Level settings in the main speaker, combined with the prescribed ST100/200 setup, yields notably too much treble energy with a hifi source (low MC carts, in my case), in my experience. Even with the darker-sounding Canterbury. Remember, these ST units do contribute noticeable output in the audible range. I'm still playing with the ST100/Canterbury and haven't tried -1.5 shelving yet (as per NZ421291), but that's a good idea -- I hadn't thought to reach into the negatives since the awful results I got there (years ago, now) on the Kensington.

Besides bumping up treble, the super-tweeters do improve clarity, impact, and definition -- and yes, the perception of slightly tighter bass comes along with that. However, in the negative side again is that they also reduce overall coherence and musical flow. Occasionally some sounds do seem localizable to the ST's (I sit midfield, which is worse for integration). Where the ST's worked wonders was with a reel-to-reel tape deck source (too bad my deck quit working a few years ago) -- it was an epic combination; even 7.5 ips tapes recorded from vinyl (on wonderful Maxell UD) were stunning, and the ST's filled-in the tapes' soft treble. With most vinyl records (lo-MC carts), so far I've found that I prefer to run without ST's. And this is with MC carts on the warm side, e.g. Koetsu Onyx Platinum (though actually very neutral and extended compared to earlier Koetsus) -- something like the Windfeld MC I used to own would peel paint from the walls when combined with ST's and Level settings! I must admit though that the black-ask ST100 looks awesome atop the Canterbury (why accent a huge body of walnut with more walnut??).

And I turned 35 recently (male), so I guess I have maybe 1 or 2 years left of passable high-frequency hearing before this ST stuff becomes a non-issue :P

Last edited by mulveling; 06-02-2014 at 06:00 PM.
Reply With Quote
  #10  
Old 06-02-2014, 08:13 PM
NZ421291 NZ421291 is offline
Guest
 
Join Date: Dec 2009
Location: Auckland, New Zealand
Posts: 652
Default

And I turned 35 recently (male), so I guess I have maybe 1 or 2 years left of passable high-frequency hearing before this ST stuff becomes a non-issue :P[/QUOTE]

Do try the ST100's with the treble shelved down to -1.5 on the Canterbury's- I find this combination makes my system sing. Yes, the Canterburys are darker than the Kensington's, and I think the Canterburys sound better listening near field.

Are your Super tweeters the B version?- yes there are 2 versions of the ST100- each having difference crossover steps & sensitivity settings!!! There is nothing noting the 2 types on the Tannoy Website- I got the information off a Japanese website & had a Japanese's speaking staff member translate.

The ST100 is a universal super tweeter with frequency 18, 20, or 22kHz adjustable & Level: 87dB, 89dB, 91dB, 93.5dB, 95dB

The ST100B has frequency 14,16 & 18kHz & Level :87dB, 89dB, 91dB, 93dB, 95dB

You need the ST100B for use with the Canterbury (Manual recommends 14kHz & 95dB which sounds best in my system).

Im 50, and had my hearing tested a few yrs ago- the Audiologist said I had the hearing of a 15 year old- he had never seen someone of my age have that level of hearing- pity my eye sight isn't as good- even after Lasik surgery, by close-up vision is rubbish!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 05:23 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video