#1
|
|||
|
|||
Incorrect height of Satisfy arm on Emotion
Hi there,
Recently I have been able (finally) to have my Clearaudio Emotion Black sing mainly because I used cables that have smaller connectors. Trying to plug my XLO Reference 3 RCA cable is a no-go as the connector is too big... Well, in fact, the center of the top RCA connector is too close to the plinth and does not allow my cable to be securely plugged. I believe that my dealer set the position of the arm too high; by lowering it by about 1 or 2 mm, I am sure my cable would fit. See pictures attached. The picture of the back view of the connector is one I found on another forum, but it is an Emotion too. But you clearly see the machined radius clears the bottom of the plinth, which is not the case with mine. What if I try to loose the allen set screw and move the arm down a bit? I don't know much about TT so I wonder if I should go back see my dealer for adjustment. Thanks for your input, Serge
__________________
Serge Last edited by jdandy; 03-19-2014 at 01:06 AM. Reason: Enlarge photos. |
#2
|
||||
|
||||
Serge.......Sure enough, the big external cover on the male RCA terminal was a serious bottleneck. Good to know you found a way around the issue.
__________________
Dan STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113 VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A |
#3
|
||||
|
||||
The tonearm should be level when the cartridge is in the groove. It would be serious design flaw if you would be prevented from this setup with the cables plugged in.
Sent from my iPad using A.Aficionado |
|
|
Audio Aficionado Sponsors | |