#1
|
||||
|
||||
MC452 x 2 = Bi-amp heaven?
You can get a screaming deal on a used 452 right now.
Has anyone on the forum bi-amped a pair? Curious if bi-amping 452’s would be better than going with a used pair of 601’s (and forget the bi-amp). Thoughts?
__________________
McIntosh Labs |
#2
|
||||
|
||||
Jon, To be clear, you are thinking of either using one amp for the low end of both channels and other for the high end or having each amp Power the low / high end with their two channels?
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum Eclipse 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#3
|
||||
|
||||
One amp for the low end, both channels...one amp got the high end, both channels
__________________
McIntosh Labs |
#4
|
|||
|
|||
Go for one amp per speaker, one amp for each channel. You elliminate channel crosstalk
|
#5
|
|||
|
|||
Plus shorter speaker cables, which is always better and cheaper.
|
#6
|
|||
|
|||
Can't do that with the MC452 though.
|
#7
|
||||
|
||||
Isn't cross talk with a high end stereo amplifier just a myth?
|
#8
|
||||
|
||||
Just get the 601s...
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum Eclipse 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#9
|
|||
|
|||
I am pretty sure you can do it! Or use two sets of interconnect from the pre-amp to the MC452 or one set of interconnects to the MC452's than use the other set of interconnects from the "out" to the other channel on the 452. This might seem complicated but there are two ways to do it.
|
#10
|
|||
|
|||
If it was, than why would it be in the specs of all gear?!
Edit: Maybe not all, but there are many producers specifying it. Last edited by 4music; 08-22-2018 at 09:58 AM. |
|
|
Audio Aficionado Sponsors | |