|
Shindo Laboratory Sound Create Producer |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Shindo is cool - in more ways than one
One of the things that surprised me about the Shindo Cortese amp, is that it runs relatively cool for a class-A SET.
The Shindo website states the power consumption at 80W; while I believe that this is a bit on the conservative side, based on the heat that comes out of it, I don't think it's too much more than that - class-A is supposed to be 25% efficient (i.e. 3W of heat for every 1W of "sound") so the 80W is not hard to believe. On the other hand, I've had similarly powered solid state and tubed class-A amps in my system (same room) that got REALLY hot and you could feel the heat a few feet away. And I've seen, heard and felt some class-A amps in stores that used 400W - per channel. Talk about room heaters. I would enjoy the heck out of my Cortese even if it sucked 400W, but not having to worry about wasted heat is a very nice added bonus (it also makes me feel good about the tubes not being run too hard.) Alberto |
#2
|
|||
|
|||
Alberto, the Cortese does run relatively cool for class a. Of course there are not that many tubes. The 10,000 hr life of the F2a tubes also speaks volumes about the conservative design.
While I don't feel a bit of difference in heat with the Shindo playing all day in my room, the ARC 210's with the combined total of 16 6550C's most definitely does warm up the room rather quickly. Come to think of it, the Lamm M1.2's Class A monoblocks used to idle at 330w and over 700w each when pushing the pedal to the metal. I don't remember having any issues with heat though. Class A is wonderful but the heat issues with some amps make them a no go in some cases. As much as I wanted to get all Krell amps for my theater, the though of having to sit in there for a few hours at a time with all the krell muscle heating up the room, I had to go with plan B. (Bryston). |
#3
|
||||
|
||||
Quote:
-Matt Last edited by pitch perfect; 08-29-2011 at 01:25 AM. Reason: typo |
#4
|
||||
|
||||
Quote:
The scary thing is that I'd listen even more if I didn't have a wife, two children and a job . Alberto |
#5
|
|||
|
|||
Alberto, which is the scary part?
|
#6
|
||||
|
||||
Becoming the audiophile equivalent of Howard Hughes .
Locked in a room, just listening to music. Alberto |
#7
|
|||
|
|||
That means you listen ~1000 hrs per year. Matt said the F2a tube is good for at least 2x 10,000 hrs, so you're good for the next 20 years!
|
#8
|
||||
|
||||
Quote:
I'm also not saying that a tube with 20,000 hours will sound like a crisp, fresh new tube, of course.. but the robustness of the tube should be fine. I just retubed my Dad's Fisher integrated amp -- He was still enjoying the original Fisher branded EL34 tubes that came with it from the mid 60's. It played fine, but there was a clear and distinct jump in performance when I swapped in a new set of EL34's. -M |
#9
|
|||
|
|||
One thing that makes me a bit concerned about getting a Cortese is that I can’t find any sources for a F2a tube (except there is a single tube on Ebay at the moment). The Cortese amp seems to be quite popular – what happens in 10 years time when everyone is trying to find new tubes?
|
#10
|
||||
|
||||
Quote:
Even if my Cortese becomes a worthless doorstop in 10 years - which I am sure it won't - I would have no regrets about buying it. Even if that time was 5 years, or even 3. The amount of musical enjoyment it's giving me is priceless. Even though I am supremely confident that if you buy from an authorized Shindo dealer you will be taken care of - even years from now; if you have any concern about the F2A tubes, buy a spare set when you get the amp, or keep your eyes open on eBay. They are not common, but they are not unobtainium as some would lead you to believe (see current auctions on eBay for evidence.) Frankly, I'd be much more worried about getting some complex fancy gear with circuit boards and ICs repaired in the future than keeping the Cortese running. Alberto |
|
|
Audio Aficionado Sponsors | |