AudioAficionado.org  

Go Back   AudioAficionado.org > Audio & Video > Isolation, Tips & Tweaks

Isolation, Tips & Tweaks Enhance your enjoyment

Reply
 
Thread Tools Display Modes
  #1  
Old 11-23-2009, 07:12 PM
Still-One Still-One is offline
Guest
 
Join Date: Apr 2009
Location: Milford, MI
Posts: 32,465
Default Vibration Control

Are any of you using vibration control between your Mcintosh sources, pre-amps or power amps and your racks? There seem to be quite a few out there but it is hard to tell which size or type will work with my gear.

If you are using them could you be specific as to the size and weight they will handle. Anyone have them under a MCD-500, MS-300/750, C1000 or C500 or under 1.2ks?

Thanks Jim
Reply With Quote
  #2  
Old 11-23-2009, 08:06 PM
PHC1 PHC1 is offline
Guest
 
Join Date: Apr 2009
Location: Pa
Posts: 23,609
Default

Jim, try the Fat Padz and similar from Symposium Acoustics. I was very impressed.

Symposium Acoustics: Products
Reply With Quote
  #3  
Old 11-23-2009, 08:18 PM
vintage_tube's Avatar
vintage_tube vintage_tube is online now
Just Pure Lucky



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,811
Default

4 each stillpoints under the amps and Harmonix TU-210ZX under the MCD500. Nothing under the preamp (yet).

stillpoints risers
__________________
Amps:VAC 450iQ Monos in Silver Flake on HRS M3X2-1921's, HRS G7 Footers/G-Links & Sound Anchor Conecoasters.
Preamp:VAC Statement (on order) (Silver Flake)
Digital Source: dCS Rossini CD/SACD Transport, Vivaldi APEX DAC, Upsampler Plus & matching Clock (Silver)
Analogue Preamp:VAC Renaissance SE Phono stage in Silver Flake with XLR Output Option & with Nordost Valhalla XLR's.
Analogue Sources:SME 20/2 w/SME V arm & Nordost Odin 2 Tone Arm Cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote (original owner since 1974).
Vibration Control:TT on HRS M3X2-1921 shelf.
Speakers:Wilson Audio Alexia V (on order in Ferrari Argento Silver/Parchment grills sitting on Acoustic Diode Kit).
Power Cables:4 Nordost Odin Supreme Reference on amps, preamp & DAC. Ansuz Acoustics C2 on Transport & Clock.
Power Distribution:Ansuz Mainz D3 Distributor & Ansuz Mainz C2 1M Power Cable
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2) on dedicated, same panel phase, 20A breakers.
Speaker Cables:2M Nordost Odin 2 Supreme Reference on Nordost Sort Lifts. (on Order)
Signal Cables:Nordost Odin XLR's on dCS DAC & Amps.
Digital Cables: Nordost Odin 2's, 110-ohm AES/EBU on dCS Transport to DAC.
Clock Cables:5 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Ethernet Cable: WireWorld Platinum 1M Starlight® 8 Twinax
Headphones:Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear:Mint late '60's/calibrated Heathkit TT-1A, MaxiMatcher Power Amp & Preamp & Space Tech Labs ATT-3.02 tube test sets.
Reply With Quote
  #4  
Old 11-23-2009, 08:25 PM
jdandy's Avatar
jdandy jdandy is offline
Merry Christmas to all



 
Join Date: Apr 2009
Location: North Central Florida
Posts: 53,224
Default

Jim.......I use four Vibrapod Model 3's under each of my MCD500's, and four Vibrapod Model 2's under my Micro Seiki turntable. The reduction of shelf born vibration into my turntable base was substantial, and produced positive results in a lower noise floor. I can't really say whether I can hear a difference with the MCD500 players, but having the Vibrapods in place under them makes me think they are doing some vibration control, so I leave them there.
__________________
Dan



STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario
LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113
VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A
Reply With Quote
  #5  
Old 11-23-2009, 08:32 PM
Still-One Still-One is offline
Guest
 
Join Date: Apr 2009
Location: Milford, MI
Posts: 32,465
Default

Quote:
Originally Posted by vintage_tube View Post
4 each stillpoints under the amps and Harmonix TU-210ZX under the MCD500. Nothing under the preamp (yet).

stillpoints risers
Gulp, $900 under your MCD-500? Which Stillpoints under your 2301?
Reply With Quote
  #6  
Old 11-23-2009, 08:35 PM
Still-One Still-One is offline
Guest
 
Join Date: Apr 2009
Location: Milford, MI
Posts: 32,465
Default

Quote:
Originally Posted by Stillone View Post
Gulp, $900 under your MCD-500? Which Stillpoints under your 2301?
Dan, do you have the cones too?
Reply With Quote
  #7  
Old 11-23-2009, 08:41 PM
vintage_tube's Avatar
vintage_tube vintage_tube is online now
Just Pure Lucky



 
Join Date: Apr 2009
Location: East Coast
Posts: 8,811
Default

Quote:
Originally Posted by Stillone View Post
Gulp, $900 under your MCD-500? Which Stillpoints under your 2301?
Helps when best friend was a dealer.

Stillpoints & Threaded Riser
Specifications: The height together with space so that they are not tightened down onto each other: 1.425"
Weight Capacity: 300 lbs per set of 3
(100 lbs per Stillpoint/Riser)
Sold in sets of 3 and 4
Attached Images
File Type: jpg S%26R.jpg (19.0 KB, 26 views)
__________________
Amps:VAC 450iQ Monos in Silver Flake on HRS M3X2-1921's, HRS G7 Footers/G-Links & Sound Anchor Conecoasters.
Preamp:VAC Statement (on order) (Silver Flake)
Digital Source: dCS Rossini CD/SACD Transport, Vivaldi APEX DAC, Upsampler Plus & matching Clock (Silver)
Analogue Preamp:VAC Renaissance SE Phono stage in Silver Flake with XLR Output Option & with Nordost Valhalla XLR's.
Analogue Sources:SME 20/2 w/SME V arm & Nordost Odin 2 Tone Arm Cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote (original owner since 1974).
Vibration Control:TT on HRS M3X2-1921 shelf.
Speakers:Wilson Audio Alexia V (on order in Ferrari Argento Silver/Parchment grills sitting on Acoustic Diode Kit).
Power Cables:4 Nordost Odin Supreme Reference on amps, preamp & DAC. Ansuz Acoustics C2 on Transport & Clock.
Power Distribution:Ansuz Mainz D3 Distributor & Ansuz Mainz C2 1M Power Cable
Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2) on dedicated, same panel phase, 20A breakers.
Speaker Cables:2M Nordost Odin 2 Supreme Reference on Nordost Sort Lifts. (on Order)
Signal Cables:Nordost Odin XLR's on dCS DAC & Amps.
Digital Cables: Nordost Odin 2's, 110-ohm AES/EBU on dCS Transport to DAC.
Clock Cables:5 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital
Ethernet Cable: WireWorld Platinum 1M Starlight® 8 Twinax
Headphones:Vintage Koss Pro IV AA.
RCM: Audio Desk PRO
Tube Test Gear:Mint late '60's/calibrated Heathkit TT-1A, MaxiMatcher Power Amp & Preamp & Space Tech Labs ATT-3.02 tube test sets.

Last edited by vintage_tube; 11-23-2009 at 08:43 PM.
Reply With Quote
  #8  
Old 11-23-2009, 08:48 PM
jdandy's Avatar
jdandy jdandy is offline
Merry Christmas to all



 
Join Date: Apr 2009
Location: North Central Florida
Posts: 53,224
Default

Jim.......No cones. The magazine reviews all say the Vibrapods with the cones is the way to go, but I am happy with the results I have now using only the Vibrapods. If it weren't for the reasonable price of the Vibrapods, I probably would only have them under my turntable. I have a hard time getting my mind around the cost verses benefit of most of the vibration wonders out there.
__________________
Dan



STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario
LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113
VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A
Reply With Quote
  #9  
Old 11-23-2009, 09:01 PM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 78,521
Default

Rollerblock Series 2+ under all sources. They are an outstanding product.
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES
Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES
Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES
Reply With Quote
  #10  
Old 11-24-2009, 07:13 AM
klipschfan's Avatar
klipschfan klipschfan is offline
Against the Tide
 
Join Date: Apr 2009
Posts: 2,349
Default

Symposium-Ultra Padz under MS750/MDA1000
Symposium-Ultra Platform under BAT VK-3iX/VK-55

Have used RollerBlock Jr's and a few other lesser known brands-prefer the Ultra Padz. If you want to experiment...? send me a PM. Can send you three or four different products to try.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 08:04 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video