Bryston announcing SST3 series amps

[James Tanner - Bryston]

Originally Posted by Acoustic

Hi,
Is the SST2 being discontinued and have a closeout sale yet? What's the lead time on the 7 cubed or 14 cubed? Thanks

Hi

Yes we are all sold out of SST amplifiers. Cubed would be about 3-4 weeks from order.

James

[Acoustic]

Thank you James.

[James Tanner - Bryston]

Hello James.

I have finally received the two 7B3 amps and got them connected to my preamp & speakers without any issues.

They look GREAT, much better than the pictures on the website. They sound way better than I imagined.

I can’t thank you enough.


Best regards
Satish Nallagatla

[JWJW]

Can someone post the MSRP's for each of the new amps?
I'm most interested in the 3B and 4B cubed...
(Sorry if already done, but I couldn't find them in earlier posts).
Thx

[audio bill]

I just saw the 4B Cubed in Audio Advisor's flyer at $5,695. No other Cubed amps were listed.

[GregGale]

Mr. Tanner, I notice that it calls for a minimum clearance around the amplifier of 3.5 inches. I have an opening in my cabinet with other audio equipment which is 23 inches depth, 11 inches high (it would appear I am slightly short on height), and 28 inches in width. Overall when looking at total space it would appear to be sufficient but I am concerned with only having 11 inches in total height which would be short of the 3.5 inch minimum and this is something I cannot adjust.

The rear of the shelves of which I have four have at least 1/2 inch of space gap between the very back of the cabinet so air can flow for example on the bottom of the cabinet where the amplifier would be located upwards.

I do like to play loudly and don't want to have an issue with thermo shut down and do not want to use any ancillary fan. Would this space work?

[James Tanner - Bryston]

Originally Posted by GregGale

Mr. Tanner, I notice that it calls for a minimum clearance around the amplifier of 3.5 inches. I have an opening in my cabinet with other audio equipment which is 23 inches depth, 11 inches high (it would appear I am slightly short on height), and 28 inches in width. Overall when looking at total space it would appear to be sufficient but I am concerned with only having 11 inches in total height which would be short of the 3.5 inch minimum and this is something I cannot adjust.

The rear of the shelves of which I have four have at least 1/2 inch of space gap between the very back of the cabinet so air can flow for example on the bottom of the cabinet where the amplifier would be located upwards.

I do like to play loudly and don't want to have an issue with thermo shut down and do not want to use any ancillary fan. Would this space work?

Hi Greg

You should be fine. The 3.5 inches is a suggestion but not set in stone and there is plenty of heatsink on the amplifiers.

james

[Volks]

James will you still be offering the choice of 17' and 19" Faceplate sizes?

[James Tanner - Bryston]

Originally Posted by Volks

James will you still be offering the choice of 17' and 19" Faceplate sizes?

Hi Michael

Yes both - 17 inch with no handles or 19 inch with handles.

james

[Volks]

Originally Posted by James Tanner - Bryston

Hi Michael

Yes both - 17 inch with no handles or 19 inch with handles.

james

Oh yeah thats right....I forgot that the 17" has no handles while the 19" does.....Kool. Thanks James