#1
|
||||
|
||||
Stillpoint adaptors for Shunyata
Just a question for either John or Caelin if at all possible.
I currently have 4 x Ultra 5s currently under both my Shunyata Cyclops but I am considering trying thread adaptors to see if the direct fixing the U5s into the conditioners makes a positive difference. I have used reasonable mass loading and the U5s are sounding exceptional under the Cyclops. I unscrewed the feet on the Shunyata and the screws seem to be 1/8 inch diameter. I'd like to have the beveled edge up on the ultra 5s and so am thinking I should order 1/2 inch - 20 to 8 - 32 adaptor. Just double checking before I put the order in. Best wishes for the seasons Graham |
#2
|
|||
|
|||
Stillpoints Adapters
Quote:
We only make 1/4-20 to (other size) adapters. We do not make a 1/2-20 to 8/32 adapter. You would likely have to engage a local machine shop to make those for you. I think it would be a stretch to locate a vendor online that currently makes that adapter... but anything is possible. John
__________________
John Tverdik, Stillpoints, Operations Manager |
#3
|
||||
|
||||
John... will look into getting some machined up as the Ultra 5s will be permanent fixtures under all my gear but particularly under the speakers and the Shunyata conditioners.
While I usually avoid the term but the ultra 5s are in fact very real and honest game changers both in terms of resonance control and also in system gains... I now have 30 of them in place and every one of them makes a clear difference. Thanks again for the great product Graham |
|
|
Audio Aficionado Sponsors | |