#21
|
|||
|
|||
Good news that the V14 Digital is that good and affordable. I am interested to buy one for my projector (Panasonic PT-AE8000). Since this is a 14AWG cable, I am curious to know how it compares to a Venom NR-V12 or 10 for this application as they have heavier gauge wire. I used to believe that heavier gauges fare better on displays? Am I correct? In my case, I will salvage a SR-Z1 outlet and a Venom defender for this application. I have a dedicated 15A line for my projector.
__________________
Serge |
#22
|
||||
|
||||
Quote:
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components. |
#23
|
|||
|
|||
That advice is probably sound. Thought I’d cross link to the plasma TV / projector thread: https://www.audioaficionado.org/show...t=27805&page=3. Caelin recommended the Venom NR V12 if budget permits (see post #24). I’d imagine this is less important on LED/LCD displays, but for higher current draw displays like plasma TVs and projectors the Venom NR V12 may get the nod.
Last edited by zonto; 07-06-2021 at 11:08 PM. Reason: Fixed hyperlink |
#24
|
|||
|
|||
Quote:
__________________
Serge |
#25
|
|||
|
|||
Has anybody ever tried a Venom 14 Digital on an Apple TV or similar streamer?
I'm finding different pictures of the cable online and can't confirm whether the noise reduction filter is in the C7 connector that would plug into the Apple TV (thus making it incompatible as it would block the HDMI output) or whether it's a standard C7 connector with the filter in the other end (making it compatible). Edit: if current production units with the C7 connector are the same as this (https://www.audioaficionado.org/showthread.php?t=46664) should be just fine. If so, what were your subjective impressions of any differences in audio or video quality using the cable? Last edited by zonto; 06-11-2021 at 04:13 PM. |
#26
|
||||
|
||||
Quote:
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components. |
#27
|
|||
|
|||
Quote:
|
#28
|
||||
|
||||
Sharper, more vibrant picture with deeper blacks.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components. |
#29
|
||||
|
||||
Old thread, but saw this video last week https://www.youtube.com/watch?v=-X9gYpmtlxE
Today I brought home a Shunyata V10 NR powercord and tried to do the same experiment as in the video, with a standard cable my measuring device (EMI wideband chinese) was showing 44mV in an unfiltered powersocket, then with the same non filtered distribution block with the Shunyata V10 NR powercord the measurement became 54mV, not a huge increase but a massive difference compared to the video where the reduction in mV is large. Is the Noise reduction in the V10 powercord less then the V14 powercords ? (V14's are not listed in the Dutch price list) Tonight I will try the Venom V10 in my system, one of my expensive Ansuz powercords moved from my Aurender N10 to the Plixir power supply (for Melco S100), which had a considerable impovement (streaming with DCS Rossini, Aurender N10 disconnected) Hopefully I can move the Ansuz powercord back to the Aurender and use the Shunyata powercord for the Plixir power supply.
__________________
Moon 700i V2, dCS Rossini, YG Acoustics Hailey, Aurender N10, Ansuz Mainz D2 |
#30
|
||||
|
||||
Quote:
It came out of power cords developed by Clear Image Scientific, Shunyata's sister company that sells power products for medical digital imaging, and it was designed for cardiac digital imaging devices. If your device is a DAC, preamp, amp, that operates at any level in the analog domain, you should ideally use a Venom NRv10 or NRv12 power cord, or higher-specification.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components. |
|
|
Audio Aficionado Sponsors | |