|
McIntosh Audio A Tradition of Excellence |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
MX150, so frustrated....its just a paper weight, 4th update, 29 Dec
Ok, so since McIntosh doesn't really want to reply to my emails and help me figure out WTF is going on I'd like to ask the forum for any input. I am the original owner when I bought the store display back in 2011.
Please disregard the temp TV position as I was having a new entertainment center built. https://www.youtube.com/watch?v=vGwHQTBU778 I have already done a hard reset, reset the MCU (it has actually done that on its own), re-positioned one of the cards inside per McIntosh, tightened another set of screws per McIntosh, replaced the flash card, removed and reinstalled flash card, left unplugged for over 30 mins. It doesn't like having a signal hooked up to it. First I had HDMI's going to all the inputs, then went to a single optical from the TV.....if I unplug the optical it will stay on, once it see's that signal though....reboot, reboot, reboot. I can't even use the damn thing right now. |
#2
|
|||
|
|||
Have you asked your dealer for assistance?
|
#3
|
||||
|
||||
Try updating the firmware on your TV. I had a similar issue but it was the Samsung TV - not the MX150. If the MX150 works with HDMI, then your Samsung TV is the paper weight.
__________________
McIntosh MX150, C2300, MC601 (5), MC207, MCD12000, MR88, MPC1500, LB100, MCLK12. Anthem AVM 90. Lumin U1. Bluesound Node. Oppo 205. Bowers & Wilkins 800 D3, CWM8.3D, CCM7.5 S2. SVS SB16-Ultra (4). Shunyata. Wireworld. Transparent. GIK. |
#4
|
|||
|
|||
Firmware is updated, this happens with both TVs I've used. Both Samsung. I don't even use hdmi. The video is going to the TV, I'm only using optical out to the mx150.
|
#5
|
||||
|
||||
Quote:
I had the exact same TV related MX151 problem. TV software update was the fix. |
#6
|
|||
|
|||
It does it with hdmi and optical. And the repair shop was able to replicate it pretty easily
|
#7
|
|||
|
|||
My dealer was a Magnolia store in San Diego and I am stationed in Japan right now.
|
#8
|
|||
|
|||
Are you trying to run a 110v US version of the 150 in Japan? Even with a convertor that is risky.
|
#9
|
|||
|
|||
Running a converter to a PS Audio PPP. Voltage is consistent and normal.
|
#10
|
||||
|
||||
What is the HDMI source you're using? Does it do it with all sources (Sat TV, blu ray, game system, etc.)??? I assume the TV is OK when the HDMI source is sent straight through to the TV bypassing the MX 150?
- Buck
__________________
Library: Speakers: Avalon Acoustics Isis, Subwoofers: (2) REL Acoustics 212SE Amplification: D’agostino Momentum preamplifier, D’agostino S250 stereo amplifier Digital: dCS Rossini CD/SACD transport, dCS Rossini DAC/streamer/master clock. Analog: Brinkmann Taurus table, Lyra Etna Lambda, Audio Research Ref. Phono 3 |
|
|
Audio Aficionado Sponsors | |