|
Cables Galore Speaker cables, Interconnects & Power cords |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
In my battle against cable clutter, I've had an idea. I hooked up my VPI 'table directly to the C2300 originally, but abandoned that due to the fact that I was impatient to break in the tubes and knew I'd use the line stage far more than the phono section. Plus, I had to fill in empty shelves on my racks, right? So the phono preamp went back in.
Now, it occurs that if I put the phono into the 2300 I will be able to eliminate one power cord and one pair of interconnects. Plus, I could even take out two shelves. Time to do some sample reconfig diagrams, before I start unplugging or pulling stuff out of the system though. One friend already doesn't like the idea; she says things are nice and balanced as is. I attached a current configuration photo from a few months back, and one with the 12TC in place to see how that looks.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#12
|
||||
|
||||
Two PDFs, one of the current setup and one without the Aragon 47k and its power supply. Perhaps it does give the TV a more prominent look.
Meantime, a dose of reality in the form of a 4% rent increase for the next lease. That'll be in the back of my head as I consider how to approach the cable clutter/power cord issues here. The 47k power supply could get a shorter cord running to the Furman Elite, but the umbilical from the supply to the turntable is hard-wired at the supply, so no help there.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#13
|
||||
|
||||
I just ordered a Venom 3s for the TV, and a 1.5m WW Stratus for the CD player. The Stratus now on the TV will go to the tuner.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#14
|
||||
|
||||
I just received my Venom 3s cord. On it, there's a tag that says, "Caution. The drain wire in this cord is not terminated to any of the terminals in the connector." What does that mean?
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#15
|
||||
|
||||
Dude how many places have you posted this. I have answered this in Welcome to Caelin thread.
__________________
Caelin Gabriel President Shunyata Research |
#16
|
||||
|
||||
Looks like only three...
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#17
|
||||
|
||||
Quote:
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#18
|
||||
|
||||
Anyway, the Venom 3s is on the TV and at first I thought, not much difference. But I think it's begun to open up more. And the sound seems to be more dimensional, meaning sound beyond the speaker borders. This seems to happen more often than it did with the WW that was there before. I'd need to listen/watch more familiar material to evaluate this, but I'm not much one for critical evaluations. I'd rather listen normally and if I notice anything then, it's meaningful.
Meantime, the WW Stratus (5.2) that was on the TV is now on the tuner, replacing a PS Audio Jewel. Preliminary indications are it has done something similar for the tuner. Sound itself is about the same, but it seems to have more dimension to it. This is listening to NPR mostly. I'll have to try stations that play more music. This doesn't help my clutter issue, but the performance changes I perceive are nice. I would have to replace everything with shorter power cables (say 4 ft.) and the dilemma there is an unnecessary expense versus helping things look neater. We'll also see if the WW cables become problematic for bundling.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#19
|
||||
|
||||
Old thread, but I am considering replacing the current setup on my Furman SPR-20i. Now, there is a Wireworld Stratus with a Pangea 20A-15A adapter connected to the SPR; the Stratus gets to the wall via a Shunyata Venom extension cord. Because of concerns about the connection's stability, I'm thinking of getting a cord with a true 20A IEC (Venom HC perhaps) and getting it to the wall via a regular 12AWG extension. There are Transparent and Kimber ICs in the system, so the replacement could be either one of those brands as well, just with a 20A IEC. Alternatively, I could get an adapter to connect the Venom HC to the Stratus and remove the Venom extension.
I wonder if there's any virtue in making such a change other than improving the IEC connection. Wireworld cords don't offer the best IEC grip on my gear, and that's my main concern.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#20
|
||||
|
||||
Or, another idea is to get a WW adapter which will allow me to use my 3m Stratus or Aurora with the SPR's stock 20A cord. Not sure which is the best way to go vs. a premium cord and regular extension. The cheapest move is the adaptor.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |