#1
|
|||
|
|||
Quick Pass Labs INT-60 Fuse Question
Does anyone know if the fuse for the INT-60 is the same as in the 250.8 or 260.8? It isn’t specified in the manual.
3AG 250 volt slow blow? |
#2
|
|||
|
|||
Quote:
for AC mains 120v : 5A 3AG-250v Slow Blow for AC mains 230v : 2.5A 3AG-250v Slow Blow |
#3
|
|||
|
|||
Got this response from Pass today via email
If you are using an aftermarket fuse on the INT-60 I would choose 6A slow blow (time delay) for 120Vac service and 3A slow blow (time delay) for 240Vac service. Sorry, I don't know where you are or what market. Check the voltage requirement on the back of the amp vs you supplied line voltage Check the fuse size. Very early INT-60's we built with the North American standard (UL rated )1/4" x 1-1/4" glass fuse. Latest production builds use the European (CE rated) fuse which is 5mm x 20mm in size. |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |