![]() |
#1
|
||||
|
||||
![]()
Anybody know anything about these? What would be the minimum output that you would want for a McIntosh preamp and McIntosh power amp? Thx
![]() |
#2
|
||||
|
||||
![]()
It depends on the specific components and their power consumption, so you'd have to check their specifications. The max total output specified at 2.0 amps may be enough for some preamps but would be current limiting and not suitable for most power amps. You would generally want some headroom with a max current significantly higher than the components rated max consumption. Hope that helps.
|
#3
|
||||
|
||||
![]()
Think I would stick with power conditioner/surge protector that is designed for audio use. Even an older/used unit would be preferable to one that is 'unknown' in the audiophile community.
__________________
Glenn... Canton Ref 9K Clearaudio SM Pro Denon DP-80 w/AT33R, AT-VM740ML, AT-MONO3/LP, Benz Glider, Dynavector XX2 MKII, Lyra Kleos, Ortofon Cdza Blk & K-b Dual 701 Ortofon OM30 Grado GW100V2 Jelco HS-25 Nordost Valhalla Oppo 203 Orsonic AV-1b Pass Labs INT-25 QHW The Vinyl Shanling M3s Sony ST-J75, ST-A6B & TA-F6B Stax UA-7/CF Stillpoints LP1v2 WW 8/7 Pt, Au & Ag Yamamoto HS-2 & 4 Yamaha T-2 |
#4
|
||||
|
||||
![]()
Get this instead. It has better plug outlets which grip the component plug VERY tightly for a good connection, comes with it's own, superb, power cord provides better dynamic transient current delivery (DTCD) than a stock or generic black power cord, and provides >10dB of Noise Reducton without the use of chokes or coils (which negatively impact DTCD). 10 outlets, with room for wall-wart style plugs, too. Also has a first-class Carling Electromagnetic breaker. Just launched yesterday. $798.
It will power your McIntosh gear WAY better than that "thing" above, it won't limit current delivery, and it will sound a lot better as well (especially if that OneAC thang has in it what I think it has in it-yeesh! ![]() ![]() I did the commercial product photography for Shunyata for this product (that's my image above), and have listened to it extensively, and I can tell you first-hand, the improvement in audio quality this brings to a system is VERY impressive. This bad boy is NO joke...I was fairly blown away by it the first time I put it in the system.
__________________
First Sound Presence Deluxe 4.0 MkIII-Si-X Paramount Special Edition preamp, Conrad-Johnson LP70S amp, On-loan: Constellation Inspiration integrated amp, Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion w/ EAR324, Oppo BD-83SE, Sonore OpticalModule with Uptone Audio LPS-1.2 power supply, Uptone Audio EtherREGEN, SOtM UltraNeo with Keces P3 power supply, Shunyata Omega & Sigma Ethernet, Alpha USB digital cables, Lampizator Baltic 3 DAC, Mac Mini/Roon, Harbeth 30.2 or Dynaudio Contour S3.4 w/ Esotar 2 tweeters, REL R-305, Shunyata Alpha V2 ICs, Shunyata Alpha V2 speaker cables, Shunyata Sigma XC, Sigma NRv2, Alpha NRv2, Alpha XC, Delta NR v2, and Venom V14D power cords, Shunyata Everest 8000 Last edited by Puma Cat; 02-15-2022 at 01:50 PM. |
#5
|
||||
|
||||
![]()
While I am sure you are correct, that is way out of my budget. I have learned a lot from several of you on this forum, but I am really swimming in the kiddy pool here. I am retired with minimal disposable income, as my only source of funds is my SS check, which allows me to live comfortably, but not much left for toys. Having McIntosh equipment has been a lifelong goal, and I had to sell a bunch of things I have collected over the years to come up with the funds. At this point I have nothing left to sell for additional funds. Not complaining, just trying to explain my situation.
|
![]() |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |