![]() |
|
Balanced Audio Technology Balanced Design, Balanced Sound |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Looking for input on a comparison, comments, pros and cons on each of these preamps. Have to drive a 30 ft. long pair of balanced interconnects to a BAT solid state amp.
|
#2
|
||||
|
||||
![]()
I would give BAT a call and ask them about driving that 30ft pair of ICs. They should be able to tell you if one is better than the other in that particular application.
The 42 will be two generations newer, so less chance of needing a recap or other maintenance like the EL display, which was something of a weak point in their older (the 50) gear. I had to have one replaced in my VK-300 integrated.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Greek-stuph Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#3
|
|||
|
|||
![]()
Thanks for the information, my VK-50SE has already been back to BAT for new output caps, new tube sockets, new display and new tubes and it is driving my 30' pair of balanced interconnects, just not sure about the solid state preamp from BAT.
|
![]() |
|
|
Audio Aficionado Sponsors | |