AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Conrad-Johnson

Conrad-Johnson It just sounds right

Reply
 
Thread Tools Display Modes
  #1  
Old 02-12-2012, 12:59 AM
dpod4
Guest
 
Posts: n/a
Default

I have seen how aftermarket power cords can make a huge difference (I would have never guessed or believed it before doing A-B testing in my system). I have Audience "e" powerchords for all my components but one (Harmonic Technology Magic Reference II Special Edition on my Herron phono preamp -- it lowers the noise floor and gets the grunge out without dampening dynamics (only on my Herron)).

So....I know C-J puts a lot of thought into every last detail sonically. I bet they even choose a champagne gold paint finish that has positive acoustic properties! But...I am wondering if anyone has swapped power cords on their CJ amps or preamps? Specifically on the Premier 350 (or CA200 since it is similar) and the GAT. If so, what differences did you hear versus stock (my Pr350 came with a superb power cord) and were you able to retain all the magic that is C-J if you switched? I just borrowed a $1,500 virtual dynamics power cord and didn't like what it did at all -- it made upper registers sound less natural and more splashy.

Thanks in advance for any insights. At this point I may hold out for a 20amp Audience powerchord "e" since I know what that brings to the party -- or keep stock cord for Pr350 since the sound is oh so yummy in stock form.

Darrin

Last edited by dpod4; 02-12-2012 at 01:48 AM.
Reply With Quote
  #2  
Old 02-12-2012, 01:59 AM
ronenash ronenash is offline
Guest
 
Join Date: Oct 2010
Location: US-NY
Posts: 1,097
Default

I had very good success with Wireworld power cords on my LP125mSE and the CA200 prior to that. Today I use the WW Aurora but I am in the process of upgrading to the electra silver.
You will find the WW power cables add focus, lower the noise floor and bring in more detail. Everything will sound more coherent and the soundstage with gain width and depth.
Reply With Quote
  #3  
Old 02-12-2012, 05:03 PM
Rafale's Avatar
Rafale Rafale is offline
Senior Member
 
Join Date: Jun 2011
Location: Tours Loire Valley France
Posts: 2,031
Default

The cordon supplied by CJ is excellent but regrettably it is not usable in Europe without an adapter, for my part I obtained very good results with Cardas ref PC on LP series amp, and I use at present Naim powerline on the whole system with Vibex powerstrip
Naim powerline has a plasticity which allows to realize well the routing in the narrow spaces, it keeps the shape which we give it
__________________
Philippe

l
LP12SE,urika phonostage,radikal power supply, dynavector XV-1s,conrad-johnson GAT and LP275M, Sonus Faber Elipsa,yter/naim/Linn cables, vibex, finite elemente
Reply With Quote
  #4  
Old 02-12-2012, 07:42 PM
jimtranr's Avatar
jimtranr jimtranr is online now
Senior Member

 
Join Date: May 2011
Location: Corvallis, OR
Posts: 1,605
Default

Not a 350 or CA200, but replacing the stock power cord with a two-meter-long Wireworld Electra 52 on my C-J Premier 17LS resulted in a quieter background, better focus, and more nuanced tonal rendering than already exhibited with that line stage in the loop and AC conditioning provided by an original-version Shunyata Hydra.
__________________
Jim



Bedroom: Aurender N150, TEAC UD-505 AKM version (to be replaced by inbound Bryston BDA-3), EMIA Cu Elmaformer passive line stage, conrad-johnson MF2500, Paradigm Studio 20 v5. Shunyata Delta D6, Altaira CG hub. Shunyata Alpha XC, Delta NR v2, Alpha USB, Alpha and Venom CGC/SGC. Wireworld Eclipse 8 interconnect & speaker cables. Stillpoints footers, Butcher Block Acoustics maple platforms. Stillpoints and GIK acoustic panels.

Home Office:Windows 11 PC/JRiver 31, TEAC UD-501, Luminous Audio Technology Axiom II Walker Mod passive, conrad-johnson Sonographe SA-250, Paradigm SE-1. Shunyata Hydra (Original Version), Venom 10 NR. Wireworld Eclipse 7 interconnects. Blue Jeans speaker cable.

Living-Dining Room: Windows 11 Laptop/JRiver 29, Oppo BD-83, TEAC UD-501 DAC, SOTA Sapphire TT, Graham Slee Era Gold V, Ortofon 2M Black, McIntosh MR-77, c-j Sonographe SC-25, c-j MF2500, Paradigm SE-3. Wireworld 8 IC, Blue Jeans SC. Shunyata Hydra 8 v.2, Shunyata Delta NR, Venom NR. GIK 244 bass & scatter-plate panels.
Reply With Quote
  #5  
Old 02-13-2012, 12:34 AM
dpod4
Guest
 
Posts: n/a
Default

Thx all - keep the good advice coming.
Reply With Quote
  #6  
Old 02-13-2012, 01:17 AM
dpod4
Guest
 
Posts: n/a
Default

Just bought a Running Springs Mongoose 20amp which is what Jeff Dorgay used with the Pr350 when he ran it in his system and reviewed it. I trust Jeff's ears and choices. Will update once I get it. Darrin
Reply With Quote
  #7  
Old 02-13-2012, 02:50 PM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
Cool, calm scientist
 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,944
Default

Darrin,
Personally, I think very, very highly of Shunyata's power cords. I have a Black Mamba HC CX on the power amp and Hydra, and Black Mamba CX's on the Oppo and preamp. I also think the Venom3 is an absolutely amazing power cord, and in my own experience, it sounds better than a WW Silver Electra 5 Squared (not that WW doesn't make a very fine cord; they do). I use a Venom3 on my phono stage and plan to order two more, one for the Bifrost DAC, and one to power another power distributor, probably a Hydra. I haven't auditioned a Running Springs cord, but I know Jeff thinks very highly of the Running Springs power conditioners.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.

Last edited by Puma Cat; 02-13-2012 at 02:54 PM.
Reply With Quote
  #8  
Old 02-13-2012, 06:29 PM
dpod4
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Puma Cat
Darrin,
Personally, I think very, very highly of Shunyata's power cords. I have a Black Mamba HC CX on the power amp and Hydra, and Black Mamba CX's on the Oppo and preamp. I also think the Venom3 is an absolutely amazing power cord, and in my own experience, it sounds better than a WW Silver Electra 5 Squared (not that WW doesn't make a very fine cord; they do). I use a Venom3 on my phono stage and plan to order two more, one for the Bifrost DAC, and one to power another power distributor, probably a Hydra. I haven't auditioned a Running Springs cord, but I know Jeff thinks very highly of the Running Springs power conditioners.
I might buy a venom 20amp to compare.
Reply With Quote
  #9  
Old 02-13-2012, 07:22 PM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
Cool, calm scientist
 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,944
Default

How can you go wrong when they are only $99?
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
  #10  
Old 02-13-2012, 08:46 PM
dpod4
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Puma Cat
How can you go wrong when they are only $99?
Exactly!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 05:06 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video